PS9513

PHOTOCOUPLER PS9513,PS9513L1,PS9513L2,PS9513L3 1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE NEPOC 8 mm CREEPAGE 8-PIN DIP HIGH-SPEED PHOTOCOUPLER DESCRIPTION The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9513 is designed specifically for high common mode transient immunity (CMR) and low pulse width distortion with operating temperature. It is suitable for IPM drive. The PS9513L1 is lead bending type for long creepage distance. The PS9513L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. The PS9513L3 is lead bending type (Gull-wing) for surface mounting. Series FEATURES Long creepage distance (8 mm MIN. : PS9513L1, PS9513L2) High common mode transient immunity (CM H, CML = 15 kV/ s MIN.) High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.) Maximum propagation delays (t PLH Pulse width distortion ( | tPHL Open collector output Ordering number of tape product : PS9513L2-E3 : 1 000 pcs/reel : PS9513L3-E3 : 1 000 pcs/reel Pb-Free product Safety standards UL approved: No. E72422 CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) BSI approved: No. 8937, 8938 SEMKO approved: No. 615433 NEMKO approved: No. P06207243 DEMKO approved: No. 314091 FIMKO approved: No. FI 22827 DIN EN60747-5-2 (VDE0884 Par...