Document
SKiiP 2414 GB17E4-4DUW
Absolute Maximum Ratings Symbol
System VCC Visol It(RMS) Imax (peak) fout Operating DC link voltage DC, t = 1 s, each polarity per AC terminal, rms, sinusoidal current Max. peak current of power section fundamental output frequency storage temperature Tj = 25 °C Tj = 175 °C Ts = 25 °C Ts = 70 °C 1300 5600 500 3600 1 -40 ... 85 1700 3385 2723 2400 junction temperature Tj = 25 °C Tj = 175 °C Ts = 25 °C Ts = 70 °C -40 ... 175 1700 2362 1869 2400 junction temperature power supply input signal voltage (high) secondary to primary side switching frequency -40 ... 175 19.2 ... 28.8 Vs + 0.3 75 10 V V A A kHz °C V A A A °C V A A A °C V V kV/µs kHz
Conditions
Values
Unit
SKiiP® 4
2-pack-integrated intelligent Power System
SKiiP 2414 GB17E4-4DUW Features
• Intelligent Power Module • Integrated current and temperature measurement • Integrated DC-link measurement • Solder free power section • IGBT4 and CAL4F technology • Tjmax = 175°C • Safety isolated switching and sensor signals • Digital signal transmission • 100% tested IPM • RoHS compliant • UL recognition in progress, file no. E242581
Tstg IGBT VCES IC ICnom Tj Diode VRRM IF IFnom Tj Driver Vs ViH dv/dt fsw
Characteristics Symbol
IGBT VCE(sat) VCE0 rCE Eon + Eoff Rth(j-s) Rth(j-r) at terminal IC = 2400 A Tj = 150 °C per IGBT switch per IGBT switch IC = 2400 A at terminal Tj = 25 °C Tj = 150 °C Tj = 25 °C Tj = 150 °C Tj = 25 °C Tj = 150 °C VCC = 900 V VCC = 1300 V 2.12 2.58 1.10 1.00 0.42 0.66 1780 2840 0.0138 0.01 2.49 2.79 1.20 1.10 0.54 0.70 V V V V m m mJ mJ K/W K/W
Conditions
min.
typ.
max.
Unit
Typical Applications*
• • • • Renewable energies Traction Elevators Industrial drives
Remarks
For further information please refer to SKiiP®4 Technical Explanation
S44 © by SEMIKRON Rev. 1 – 15.12.2011 1
SKiiP 2414 GB17E4-4DUW
Characteristics Symbol
Diode VF = VEC VF0 rF at terminal IF = 2400 A Tj = 150 °C per diode switch per diode switch supply voltage non stabilized bias current @Vs= 24V, fsw = 0, IAC = 0 k1 = 47 mA/kHz, k2 = 0.258 mA/A input threshold voltage (HIGH) Input threshold voltage (LOW) input resistance input capacitance error memory reset time top / bottom switch interlock time jitter clock time short pulse suppression time Power-On-Reset completed Collector-Emitter Threshold Static Monitoring Voltage Collector-Emitter Threshold Static Monitoring Blanking Time digital output sink current (HALT-signal) input threshold voltage HIGH HALT (Low -->High) input threshold voltage LOW HALT (High --> Low) Error delay time (from detection to HALT), (depends on kind of error) over current trip level over temperature trip level over temperature PCB trip level over voltage trip level, bandwidth of DC-voltage measurement @ VDCtrip (-3dB) bandwith of current measurement @ ITRIPSC (-3dB), bandwidth of temperature measurement @ Ttrip (-3dB) 1.8 3525 126 113 1300 3600 130 120 1340 2 50 5 0,6*Vs 0.4*Vs 170 3675 134 124 1380 1.3 3 52 0.6 3.5 7.5 6 16 58 13 1 2.9 = 360 0,7*Vs 0,3*Vs 19.2 24 360 + k1* fsw + k2 * IAC IF = 2400 A at terminal Tj = 25 °C Tj = 150 °C Tj = 25 °C Tj = 150 °C Tj = 25 °C Tj = 150 °C VR = 900 V VR = 1300 V 2.02 2.27 1.21 0.99 0.34 0.53 283 456 0.0281 0.0241 28.8 2.34 2.62 1.36 1.12 0.41 0.63 V V V V m m mJ mJ K/W K/W V mA mA V V k nF s µs µs ns µs s V µs mA V V µs APEAK °C °C V kHz kHz Hz
Conditions
min.
typ.
max.
Unit
SKiiP® 4
2-pack-integrated intelligent Power System
SKiiP 2414 GB17E4-4DUW Features
• Intelligent Power Module • Integrated current and temperature measurement • Integrated DC-link measurement • Solder free power section • IGBT4 and CAL4F technology • Tjmax = 175°C • Safety isolated switching and sensor signals • Digital signal transmission • 100% tested IPM • RoHS compliant • UL recognition in progress, file no. E242581
Err Rth(j-s) Rth(j-r) Driver Vs ISO IS VIT+ VITRIN CIN tpRESET tTD tjitter tSIS tPOR VCEstat tbl Idigiout Vit+ HALT Vit-HALT td(err) ITRIPSC Ttrip TDriverTrip VDCtrip f0Uana f0Iana f0Tana
tpReset(OCP) Over current reset time
Typical Applications*
• • • • Renewable energies Traction Elevators Industrial drives
Remarks
For further information please refer to SKiiP®4 Technical Explanation
S44 2 Rev. 1 – 15.12.2011 © by SEMIKRON
SKiiP 2414 GB17E4-4DUW
Characteristics Symbol
System td(on)IO td(off)IO VCC = 1300 V IC = 2400 A Tj = 25 °C
Conditions
turn on propagation delay time turn off propagation delay time IC = 0 A IC = 2400 A
min.
typ.
max.
Unit
2.8 2.6 14 3 10 0.0065 0.0675 4.5 6 0.08 0.199 6 13 3.22 4.25 8 15
µs µs kV/µs kV/µs kV/µs K/W m nH nF nF mA Nm Nm kg kg
SKiiP 4
2-pack-integrated intelligent Power System
SKiiP 2414 GB17E4-4DUW Features
• Intelligent Power Module • Integrated current and temperature measurement • Integrated DC-link measurement • Solder free power section • IGBT4 and CAL4F technology • Tjmax = 175°C • Safety isolated switching and sensor signals • Digital signal transmission • 100% tested IPM • RoHS compliant • UL recognition in progress.