SGP34063

SGP34063 Elektronische Bauelemente RoHS Compliant Product DC To DC Converter Controller Description 9.017 10.160 DIP-8 Gauge Plane The SGP34063 is a monolithic regulator subsystem, intended for use as DC to DC conv erter. This device contains a temperature compensated band gap reference, a duty-cycle control oscillator, driver and high current output switch. It can be used for step-down, step-up or inverting switching regulators as well as for series pass regulators. 6.096 7.112 10.92 max. 7.620 8.255 0.762 1.143 Features *Operation from 3.0V to 40V. *Short circuit current limiting. *Low standby current. *Output switch current of 1.5A without external transistors. *Frequency of operation from 100Hz to 100kHz. *Step-up, step-down or inverting switch regulators. 1.143 1.778 2.540 BSC 0.356 0.559 2.921 4.953 0.5334 max. 0.381 min. (seating plane) 2.921 3.810 Dimensions in mm MARKING 8 7 6 5 34063 xxxx 1 2 3 4 Datecode Pin Configuration & Representative Schematic Diagram rogrammed by pacitor CT to ground .Operation 500kHz nts up to This is the reference output .It provides charging current for capacitor CT http://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 1 of 5 SGP34063 Elektronische Bauelemente DC To DC Converter Controller Absolute Maximum Ratings at Ta = 25 °C Parameter Operating Junction Temperature Operating Ambient Temperature Range Storage Temperature Range Supply Voltage Comparator I...