DatasheetsPDF.com

SNP-B208 Dataheets PDF



Part Number SNP-B208
Manufacturers Skynet
Logo Skynet
Description SNP-B Series Power
Datasheet SNP-B208 DatasheetSNP-B208 Datasheet (PDF)

SNP-B Series Features ● ● ● ● ● ● Machinery ITE & Medical 40W to 300W Machinery Box type ITE & Medical Dual Safety Approvals* Built-in Active PFC (except SNP-B04/B06) Power On LED indication Adjustable output Optional Din Rail Mounting Fixture Model Selection Model No. Output Rail Min Load Rated Peak* 2.2A 3.3A 2.7A 1.7A 3.3A 5.0A 4.0A 2.5A 5.6A 8.3A 6.7A 4.2A 8.3A 12.5A 10.0A 6.5A 11.0A 16.7A 13.3A 8.3A 16.7A 23.0A 18.5A 11.66A 4.2A 6.0A .

  SNP-B208   SNP-B208


Document
SNP-B Series Features ● ● ● ● ● ● Machinery ITE & Medical 40W to 300W Machinery Box type ITE & Medical Dual Safety Approvals* Built-in Active PFC (except SNP-B04/B06) Power On LED indication Adjustable output Optional Din Rail Mounting Fixture Model Selection Model No. Output Rail Min Load Rated Peak* 2.2A 3.3A 2.7A 1.7A 3.3A 5.0A 4.0A 2.5A 5.6A 8.3A 6.7A 4.2A 8.3A 12.5A 10.0A 6.5A 11.0A 16.7A 13.3A 8.3A 16.7A 23.0A 18.5A 11.66A 4.2A 6.0A 5.0A 3.0A 6.7A 8.5A 6.5A 5.0A 8.0A 12.0A 10.0A 6.0A 10.7A 16.0A 13.0A 8.0A 16.5A 25.0A 20.0A 10.0A 26.7A 37.44A 32.0A 15.0A Initial Adjustable Accuracy* Range* +18.0V~+18.2V +12.0V~+12.1V +15.0V~+15.2V +24.0V~+24.2V +18.0V~+18.2V +12.0V~+12.1V +15.0V~+15.2V +24.0V~+24.2V +18.0V~+18.2V +12.0V~+12.1V +15.0V~+15.2V +24.0V~+24.2V +18.0V~+18.2V +12.0V~+12.1V +15.0V~+15.2V +24.0V~+24.2V +18.0V~+18.2V +12.0V~+12.2V +15.0V~+15.2V +24.0V~+24.2V +18.0V~+18.2V +12.0V~+12.2V +15.0V~+15.2V +24.0V~+24.2V +17V~+19V +11V~+13V +14V~+16V +22V~+30V +17V~+19V +11V~+13V +14V~+16V +22V~+30V +17V~+19V +11V~+13V +14V~+16V +22V~+30V +17V~+19V +11V~+13V +14V~+16V +22V~+30V +17V~+19V +11V~+13V +14V~+16V +22V~+30V +14V~+16V +11V~+13V +14V~+16V +22V~+30V Ripple& Noise* 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 50mV 100mV 100mV 100mV 50mV Efficiency 85% 83% 83% 80% 85% 83% 83% 85% 85% 85% 85% 84% 85% 85% 85% 85% 85% 85% 85% 85% 89% 85% 85% 85% SNP-B045 +18V 0A SNP-B047 +12V 0A SNP-B048 +15V 0A SNP-B049 +24V 0A SNP-B065 +18V 0A SNP-B067 +12V 0A SNP-B068 +15V 0A SNP-B069 +24V 0A SNP-B105 +18V 0A SNP-B107 +12V 0A SNP-B108 +15V 0A SNP-B109 +24V 0A SNP-B155 +18V 0A SNP-B157 +12V 0A SNP-B158 +15V 0A SNP-B159 +24V 0A SNP-B205 +18V 0A SNP-B207 +12V 0A SNP-B208 +15V 0A SNP-B209 +24V 0A SNP-B305 +18V 0A SNP-B307 +12V 0A SNP-B308 +15V 0A SNP-B309 +24V 0A Notes ● ● ● ● ● ● ● All specifications without special notices are defined at nominal line, rated load and 25oC. Initial accuracy is set at 60% rated load and 115VAC input. Peak load can last 10 seconds. Output could be adjusted through potentiometer, but total output power should be kept under rated power (initial accuracy x rated current). Ripple & Noise is defined with 15MHz BWL oscilloscope and 1X probe with 0.47uF output capacitor. All specifications subject to change without notice. This datasheet is only for model selection. Please contact [email protected] for formal specificaion. Product Manager: Eric Technical Supervisor: Eric 21 Rev. 2011 SNP-B Series General Specifications ─ Input & Output ─ Input voltage range Label voltage Nominal line voltage Input frequency range Inrush current* Line/Load regulation Hold-up time ─ Protection ─ Over Voltage* Over Load/Short Over Temperature Other Protections ─ Environmental ─ Operating temperature Cooling Power derating Storage temperature Relative humidity Operating altitude 90VAC to 264VAC 100VAC to 240VAC 115VAC / 230VAC 47Hz to 63Hz <30A at 115VAC, <60A at 230VAC <±1% 20ms typ. Latch-off Auto-recovery Auto-recovery See notes -20oC to +70oC Convection cooling Refer to Power Derating Curve -20oC to +85oC 5% to 90% RH, non-condensing 0 to 2000m ─ EMC ─ Emission Harmonic currents ESD Radiated immunity EFT/Burst Surge Conducted immunity MS Voltage dips ─ Safety ─ Approvals ─ Function ─ Green LED Potentiometer Machinery ITE & Medical 40W to 300W FCC/CISPR, level B EN61000-3-2* EN61000-4-2, criterion A 6kV contact, 8kV air discharge EN61000-4-3 10V/M with 80% AM, creiterion A EN61000-4-4, 2kV, criterion A EN61000-4-5, 1kV L-L, 2kV L-E, criterion A EN61000-4-6 10V with 80% AM, criterion A EN61000-4-8, 10A/m, criterion A EN61000-4-11 30% dips 10ms, criterion B 60% dips 100ms, criterion C 95% dips 5000ms, criterion C 60950-1, 1st/2nd edition (TUV, UL, CSA) 60601-1, 2nd/3rd edition (TUV, UL, CSA) CB Report, CE Mark For power on indication, near terminal blocks For output adjustment Notes ● ● ● ● ● ● ● All specifications without special notices are defined at nominal line, rated load and 25oC. Inrush current is defined at 25oC cold start and EMI capacitors are excluded. Over voltage protection mode is defined at 60% rated load. This product shall not be damaged when input voltage is below 90VAC or AC input is cycling ON/OFF. Harmonic currents level is "class D" for SNP-B10/B15/B20/B30, and "class A" for SNP-B04/B06. All specifications subject to change without notice. Conditions of safety approvals are different from models. Please contact Skynet for detailed information. Power Derating Curve (SNP-B30x) Power Derating Curve (other models) Output Pin (SNP-B04/B06/B10) Pin No. 1 2 .


SNP-B207 SNP-B208 SNP-B209


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)