AC/DC TO LOGIC INTERFACE OPTOCOUPLER
AC/DC TO LOGIC INTERFACE OPTOCOUPLER
HCPL-3700
DESCRIPTION
The HCPL-3700 voltage/current threshold detection optocoupler...
Description
AC/DC TO LOGIC INTERFACE OPTOCOUPLER
HCPL-3700
DESCRIPTION
The HCPL-3700 voltage/current threshold detection optocoupler consists of an AlGaAs LED connected to a threshold sensing input buffer IC which are optically coupled to a high gain darlington output. The input buffer chip is capable of controlling threshold levels over a wide range of input voltages with a single resistor. The output is TTL and CMOS compatible.
8 1
FEATURES
AC or DC input Programmable sense voltage Logic level compatibility Threshold guaranteed over temperature (0°C to 70°C) Optoplanar™ construction for high common mode immunity UL recognized (file # E90700) TRUTH TABLE (Positive Logic) Input H L Output L H
8 1
8 1
APPLICATIONS
Low voltage detection 5 V to 240 V AC/DC voltage sensing Relay contact monitor Current sensing Microprocessor Interface Industrial controls
A 0.1 µF bypass capacitor must be connected between pins 8 and 5.
AC DC+
1 2 3 4
8 7 6 5
VCC NC VO GND
AC/DC POWER
RX HCPL-3700 LOGIC
DCAC
GND 1
GND 2
ABSOLUTE MAXIMUM RATINGS (No derating required up to 70°C)
Parameter Storage Temperature Operating Temperature Lead Solder Temperature EMITTER Input Current Average Surge Transient Input Voltage (Pins 2-3) Input Power Dissipation Total Package Power Dissipation DETECTOR Output Current Supply Voltage Output Voltage (Average) (Pins 8-5) (Pins 6-5) (Note 4) (Note 3) IO VCC VO PO 30 (MAX) -0.5 to 20 -0.5 to 20 210 (MAX) mA V V mW (Note 1) (Note 2) 3 ms, 120 H...
Similar Datasheet