Document
General Purpose Relays PCB Relays Miniature Power PCB RYII & RYII Reflow Solderable
n 1
SCHRACK
pole 8A, 1 form C (CO) or 1 form A (NO) or 1 form B (NC) contact component height 12.3mm n 5kV/8mm coil-contact n Reinforced insulation (protection class II) n Pinnings: 3.2mm and 5mm n Reflow-solderable version n Especially suitable for resistive and inductive loads on form A (NO) and form B (NC) contacts n Plastic materials according to IEC 60335-11) (domestic appliances)
n Low
Typical applications heating control, interface technology, domestic appliances, timers, temperature control
1) not available as reflow-solderable version
F0142-E
Z
Coil Data
Coil voltage range Operative range, IEC 61810 5 to 60VDC 2
Approvals
VDE REG.-Nr. 5358, UL E214025
Technical data of approved types on request
Contact arrangement Rated voltage Max. switching voltage Rated current Breaking capacity max. Contact material Frequency of operation, with/without load Operate/release time max. Bounce time max., form A/form B
Contact Data
1 form C (CO) or 1 form A (NO) or 1 form B (NC) 250VAC 400VAC 8A 2000VA AgNi0.15, AgSnO2 6/1200min-1 9/5ms 6/10ms
Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW 005 5 3.5 0.5 112 223 006 6 4.2 0.6 162 222 009 9 6.3 0.9 320 253 012 12 8.4 1.2 627 230 024 24 16.8 2.4 2350 245 048 48 33.6 4.8 9391 245 060 60 42.0 6.0 14000 257
All figures are given for coil without pre-energization, at ambient temperature +23°C Other coil voltages on request
Contact ratings Type Contact Load Cycles IEC61810 RY531 A (NO) 8A, 250VAC, 70°C 100x103 RY211 A (NO) 8A, 250VAC, 70°C 75x103 RY211 B (NC) 8A, 250VAC, 70°C 50x103 UL508 RY211 A/B (NO/NC) 10A, 250VAC, general purpose, 70°C 30x103 RY211 A (NO) 1/2hp, 240VAC, 85°C 30x103 RY211 A/B (NO/NC) B300, 70°C 6x103 EN60730-1 RY211 A/B (NO/NC) 6(4)A, 250VAC, 85°C 100x103 RY211 A (NO) 8(4)A, 250VAC, 75°C 100x103 Mechanical endurance, DC coil 30x106 operations
Insulation Data
Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base reflow-solderable version
1000Vrms 5000Vrms ≥8/8mm IIIa PTI250 PTI175
05-2013, Rev. 0513 www.te.com © 2013 Tyco Electronics Corporation, a TE Connectivity Ltd. company
Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.
Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.
1
General Purpose Relays PCB Relays Miniature Power PCB RYII & RYII Reflow Solderable (Continued)
Other Data
PCB layout / terminal assignment
Bottom view on solder pins
SCHRACK
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to +70°C +85°C at 6A Category of environmental protection IEC 61810 RTII - flux proof RTIII - wash tight1) Vibration resistance (functional), form A (NO)/form B (NC) 20/5g Shock resistance (functional) form A (NO)/form B (NC) 20/5g Shock resistance (destructive) 100g Terminal type PCB-THT, PCB-THR Weight 8g Resistance to soldering heat THT IEC 60068-2-20 RTII : 270°C/10s RTIII : 260°C/5s Resistance to soldering heat THR IEC 60068-2-58 250°C, no infrared heating allowed Packaging/unit standard version tube/20 pcs., box/500 pcs. reflow version reel/280 pcs. box/1120 pcs. (4 reels)
1) not available as reflow-solderable version
1 form C (CO) contact, 3.2 mm
S0254-AA
S0254-AB
1 form A (NO), 1 form B (NC) contact 5 mm
Accessories
For details see datasheet
Accessories Miniature PCB Relay RY
S0254-AC
Dimensions
Pinning 3.2mm
S0254-AE
S0274_CA
S0254-AD
Pinning 5mm
S0254-AF
S0274-CB
2) Values in brakets are valid for reflow-solderable version
2
05-2013, Rev. 0513 www.te.com © 2013 Tyco Electronics Corporation, a TE Connectivity Ltd. company
Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.
Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.
General Purpose Relays PCB Relays Miniature Power PCB RYII & RYII Reflow Solderable (Continued)
Soldering profile for reflow-solderable version Tape dimensions
SCHR.