GPM9082
1MHz, 2.5A Boost Convertor
General Description
The GPM9082 step-up switching regulator generates an output volt...
GPM9082
1MHz, 2.5A Boost Convertor
General Description
The GPM9082 step-up switching
regulator generates an output voltage of up to 5.5V from an input voltage as low as 2.0V. Ideal for applications where space is limited, it switches at 1.0MHz, allowing the use of tiny, low cost and low profile external components. Its internal 2.5A, 100m Ω NMOS switch provides high efficiency even at heavy load, while the constant frequency, current mode architecture results in low, predictable output noise that is easy to filter. Internal frequency compensation is designed to accommodate ceramic output capacitors, further reducing noise. The device features very low shutdown current of 0.5uA. The GPM9082 features over current protection, open load protection, under voltage lock-out and over temperature protection. The GPM9082 is available in SOT-23-6 package.
Features
n Internal 2.5A MOSFET Switch n 1.0MHZ Switching Frequency n Integrated Soft-Start n Low 2.0V Vin Operation n Low Rdson Switch :100m Ω at 5V Output n Delivers 5V at 1200mA from a 3.3V input n Cost effective for using smaller devices n Under-Voltage-Lockout n Over-Temperature Protection n Open-Load Protection n Low profile(1mm):SOT-23-6 package
Applications
n White LED Driver Supply
n Local 3.3V or 5V supply n Battery Back-up
n Audio System
Typical Application
2.2uH
1
SW
5/6 VIN
C IN
VOUT 5V/1200mA
R2
CO
GPM9082
OFF ON
V IN
10uF
4
SHDN
FB 3
R1
GND
2
10uF
Giant Power Microelectronics Co., LTD
1
GPM9082
1MHz, 2....