HRM1017

Technical Report Prototype Bluetooth Low Energy Module HRM1017 PRODUCT OVERVIEW HRM1017 is Bluetooth Low Energy Module that supplied by Hosiden Corporation. It is based on Nordic nRF51822 and achieves high performance radio and low power operation. HRM1017 product features are as follows: Integral antenna A fine-tuned PCB antenna is on the module. It relieves you of difficult RF consideration. Supports DC/DC convertor enable mode HRM1017 has internal circuit to drive nRF51822 internal DC/DC convertor. You can operate this module in DC/DC convertor enable mode without external components in your circuit. All GPIO ports are available All programmable ports are assigned to module I/O. You can design the products as in the case of chip-on-board design. VDD RESET GPIOs AINs SWDIO SWDCLK External Clock I/O GND Quick evaluation and development Hosiden has prepared the evaluation board that is pin-compatible with Nordic PCA10004. So you can start HRM1017 evaluation immediately if you already have Nordic nRFGo Motherboard (refer overleaf for detail). nRF51822 RF Circuit 16 MHz SPECIFICATION Item Bluetooth Version Output Power Interface Dimensions Supply Voltage Mounting Type Specification Bluetooth 4.0 LE (Single Mode)* +4 dBm typical UART, SPI, I2C and GPIOs 12.7 x 23.0 x 2.6 mm 1.8 to 3.6V (3.0V typ.) Solder bumps (1.2 mm pitch, 44 bumps) *Hosiden is applying for Bluetooth qualification. Date: Feb. 2013 Hosiden Europe GmbH Graf-Recke-Str. 82, 40239 Dusseldorf, Germany Phon...