PR39MF51NSZF

PR39MF51NSZ Series PR39MF51NSZ Series IT(rms)≤0.9A, Cost effective Non-Zero Cross type DIP 8pin Triac output SSR ■ Description PPR39MF51NSZ Series Solid State Relays (SSR) are an integration of an infrared emitting diode (IRED), a Phototriac Detector and a main output Triac. These devices are ideally suited for controlling high voltage AC loads with solid state reliability while providing 4.0kV isolation (Viso(rms)) from input to output. ■ Agency approvals/Compliance 1. Under application to UL, CSA and VDE 2. Package resin : UL flammability grade (94V-0) ■ Applications 1. Isolated interface between high voltage AC devices and lower voltage DC control circuitry. 2. Switching motors, fans, heaters, solenoids, and valves. 3. Phase or power control in applications such as lighting and temperature control equipment. ■ Features 1. Output current, IT(rms)≤0.9A 2. Non-zero crossing functionary 3. 8 pin DIP package (SMT gullwing also available) 4. High repetitive peak off-state voltage (VDRM : 600V) 5. Superior noise immunity (dV/dt : MIN. 100V/µs) 6. Response time, ton : MAX. 100µs 7. Lead-free terminal components are also available (see Model Line-up section in this datasheet) 8. High isolation voltage between input and output (Viso(rms) : 4.0kV) Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devi...