MT9V032

MT9V032: 1/3-Inch Wide-VGA Digital Image Sensor Features 1/3-Inch Wide-VGA CMOS Digital Image Sensor MT9V032 Data Sheet For the latest data sheet revision, refer to Aptina’s Web site: www.aptina.com Features Array format: Wide-VGA, active 752H x 480V (360,960 pixels) Global shutter photodiode pixels; simultaneous integration and readout Monochrome or color: Near_IR enhanced performance for use with non-visible NIR illumination Readout modes: progressive or interlaced Shutter efficiency: >99% Simple two-wire serial interface Register Lock capability Window Size: User programmable to any smaller format (QVGA, CIF, QCIF, etc.). Data rate can be maintained independent of window size Binning: 2 x 2 and 4 x 4 of the full resolution ADC: On-chip, 10-bit column-parallel (option to operate in 12-bit to 10-bit companding mode) Automatic Controls: Auto exposure control (AEC) and auto gain control (AGC); variable regional and variable weight AEC/AGC Support for four unique serial control register IDs to control multiple imagers on the same bus Data output formats: – Single sensor mode: 10-bit parallel/stand-alone 8-bit or 10-bit serial LVDS – Stereo sensor mode: Interspersed 8-bit serial LVDS Table 1: Key Performance Parameters Value 1/3-inch 4.51mm(H) x 2.88mm(V) 5.35mm diagonal 752H x 480V 6.0μm x 6.0μm Monochrome or color RGB Bayer pattern Global shutter 26.6 MPS/26.6 MHz 752 x 480 60 fps (at full resolution) 10-bit column-parallel 4.8 V/lux-sec (550nm) >...