3-Line ESD Protection Array
SPE1244
3-Line ESD Protection Array
DESCRIPTION The SPE1244 are designed by TVS array that is to protect sensitive elect...
Description
SPE1244
3-Line ESD Protection Array
DESCRIPTION The SPE1244 are designed by TVS array that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. SPE1244 will protect up to three line, and may be used on lines where the signal polarities swing above and below ground. SPE1244 offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. SPE1244 may be used to meet the immunity requirements of IEC 61000-4-2, level 4. The small SOT-143 package makes them ideal for use in portable electronics such as cell phones, PDA’s, notebook computers, and digital cameras. APPLICATIONS ADSL Industrial Electronics RS-422 Interfaces Portable Electronics Microcontroller Input Protection WAN/LAN Equipment
FEATURES Transient protection for data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Protects four I/O lines Working voltage: 12V Low leakage current Low operating and clamping voltages
PIN CONFIGURATION ( SOT-143-A )
PART MARKING ( SOT-143-A )
2009/12/30 Ver.1
Page 1
SPE1244
3-Line ESD Protection Array
ORDERING INFORMATION Part Number Package Part Marking 14YW SPE1244S14ARGB SOT-143-A ※ Week Code : A ~ Z( 1 ~ 26 ) ; a ~ z( 27 ~ 52 ) ※ SPE1244S14ARGB : Tape Reel ; Pb – Free ; Halogen – Free
ABSOULTE MAXIMUM RATINGS (TA=25℃ Unless otherwise not...
Similar Datasheet