Document
Spec. No.: Version: Total pages: Date:
MDGD012-SN01-0 0 28 2004- October-27
AU OPTRONICS CORPORATION
Product Functional Specifications
12.1 ” SVGA Color TFT-LCD Module
Model Name: G0121SN01 V.0
Approved by
Prepared by
Martin Sun
Cynthia Lin
GD- MDBU Marketing Division / AU Optronics Croporation
Customer
Checked & Approved by
(C) Copyright AU Optroncis, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed.
G121SN01 V.0
ver.0
1/28
Version: 0 Total Pages: 28 Date: 2004/10/27
Product Functional Specification 12.1 inch SVGA Color TFT LCD Module Model Name: G121SN01 V.0
(u ) Preliminary Specification ( ) Final Specification
Note: This Specification is subject to change without notice.
(C) Copyright AU Optroncis, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed.
G121SN01 V.0
ver.0
2/28
I. Contents
1.0 2.0 Handling Precautions…………………………………………………..…5 General Description……………………………………………………….6 2.1 Display Characteristics 2.2 Functional Block Diagram Absolute Maximum Ratings……………………………………………...8 Optical Characteristics……………………………………………………9 Signal Interface……………………………………………………………12 5.1 5.2 5.3 Connectors Signal Pin Signal Description
3.0 4.0 5.0
6.0 7.0 8.0
5.4 Signal Electrical Characteristics 5.5 Signal for Lamp Connector Pixel Format Image………………………………………………………16 Parameter Guide Line CCFL Inverter…….…………………………...17 Interface Timing..…………………………………………………………18 8.1 Timing Characteristics 8.2 Timing Definition 8.3 Timing Chart Power Consumption ……………………………………………………..22 Power ON/OFF Sequence……………………………………………….23 Reliability / Safety Requirement……………………………………..…24 11.1 Reliability Test Conditions 11.2 Safety 11.3 Green Packing Dimension………………………….……………………………25 Mechanical Characteristics……………………………………………..26 13.1 13.2 13.3 LCM Outline dimension (Front View) LCM Outline Dimension (Rear View) Screw Note
9.0 10.0 11.0
12.0 13.0
(C) Copyright AU Optroncis, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed.
G121SN01 V.0
ver.0
3/28
II. Record of Revision
Version and Date 0. 2004/10/27 Page All Old Description First Draft All New Description Remark
(C) Copyright AU Optroncis, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed.
G121SN01 V.0
ver.0
4/28
1.0 Handing Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it. 2) Be sure to turn off power supply when inserting or disconnection from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. 7) Do not open nor modify the module Assembly. 8) Do not press the reflector sheet at the back of the module to any directions..