Document
HVK
Features
UH-4610
Series
Vertical Chip Polymer Hybrid type Aluminum Electrolytic Capacitors
For surface mount 125 deg C, 4000 hours guaranteed. Low E.S.R. and high ripple current are realized. Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) Specifications
Item Category temperature range (deg C) Rated Voltage (V) Tolerance at rated capacitance (%) Leakage current (uA) Tangent of loss angle ESR (mohm max.) Rated ripple current (mArms max.) Performance -55 to +125 25 to 63 -20 to +20 Less than 0.01CV C:Rated capacitance(uF), V:Rated voltage(V) after 2 minutes
Rated voltage (V) Tangent of loss angle
(20deg C,120Hz) (20deg C)
25 0.14
35 0.12
50 0.10
63 0.08 (20deg C,120Hz) (20deg C,100kHz) (125deg C,100kHz)
Refer to Standard Ratings. Refer to Standard Ratings. Test time Leakage current 4000 hours
The initial specified value or less Within -30% to +30% of initial value 200% or less of the initial specified value p value 200% or less of the initial specified
Endurance(125deg C) (Applied ripple current)
Capacitance change Tangent of loss angle g ESR change
Shelf life(125deg C)
Test time : 1000 hours ; other items are the same as those for the endurance. Voltage application treatment.
Coefficient of Frequency for Rated Ripple Current 120 0.10 Part numbering system (35V270uF)
Coefficient
Trequency (Hz)
1k 0.30 M
Capacitance tolerance symbol
10k 0.60 H10
Casing symbol
100k 1.00 E
Additional symbol
100k or more 1.00
HVK
Series code
-
35
Rated voltage symbol
V
271
Rated capacitance symbol
-
R2
Taping symbol
Outline drawing
Lead : Sn + Bi(0.5%) plating
0.3 Max
A +/-0.2
0.4 +/-0.2 (P)
φD +/-0.5
B +/-0.2
L
W ( ) : Reference size
φD 6.3 8 8 10 10
L
7.7+/-0.3 8.7+/-0.3 10.0+/-0.5 8.7+/-0.3 10.0+/-0.5
A 6.6 8.4 8.4 10.4 10.4
B 6.6 8.4 8.4 10.4 10.4
C 2.7 3.0 3.0 4.7 4.7
W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1
Unit : mm Casing P symbol 2.0 F80 3.1 G90 3.1 G10 H90 4.7 H10 4.7
(Note) Design,Specifications are subject to change without notice. (Note) It is recommended that you shall obtain technical specifications from ELNA CO.,LTD to ensure that the component is suitable for your intended use.
(C)
(C)
ELNA CO.,LTD. ,
http://www.elna.co.jp/
3-8-11 Shinyokohama, kouhoku-ku, yokohama-city, kanagawa, 222-0033, JAPAN TEL:045 470 7255 FAX:045-470-7260 TEL:045-470-7255 FAX:045 470 7260
HVK Series
Standard Ratings
Vertical Chip Polymer Hybrid type Aluminum Electrolytic Capacitors
UH-4610
Rated Part number voltage (V)
Rated capacitance
ESR
Tangent of loss angle
Rated ripple current ( mArms )
125deg C 100kHz
External dimensions (mm) D 6.3 8 8 10 10 6.3 8 8 10 10 6.3 8 8 10 10 6.3 8 8 10 10 L 7.7 8.7 10.0 8.7 10.0 7.7 8.7 10.0 87 8.7 10.0 7.7 8.7 10.0 8.7 10.0 7.7 8.7 10.0 8.7 10.0
(mohm)
(uF) 25 25 25 25 25 35 35 35 35 35 50 50 50 50 50 63 63 63 63 63 100 150 220 270 330 68 100 150 220 270 33 47 68 82 100 22 27 33 47 56
20deg C 100kHz
HVK-25V101MF80E-R2 HVK-25V151MG90E-R2 HVK-25V221MG10E-R2 HVK-25V271MH90E-R2 HVK-25V331MH10E-R2 HVK-35V680MF80E-R2 HVK-35V101MG90E-R2 HVK-35V151MG10E-R2 HVK-35V221MH90E-R2 HVK-35V271MH10E-R2 HVK-50V330MF80E-R2 HVK-50V470MG90E-R2 HVK-50V680MG10E-R2 HVK-50V820MH90E-R2 HVK-50V101MH10E-R2 HVK-63V220MF80E-R2 HVK-63V270MG90E-R2 HVK-63V330MG10E-R2 HVK-63V470MH90E-R2 HVK-63V560MH10E-R2
30 27 27 25 20 35 30 27 25 20 40 35 30 27 25 80 50 40 35 30
0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0 12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.08 0.08 0.08 0.08 0.08
1,400 1,500 , 1,600 1,700 2,000 1,400 1,500 1,600 1 700 1,700 2,000 1,100 1,200 1,250 1,400 1,600 900 1,000 1,100 1,200 1,400
(Note) Design,Specifications are subject to change without notice. (Note) It is recommended that you shall obtain technical specifications from ELNA CO.,LTD to ensure that the component is suitable for your intended use.
ELNA CO CO.,LTD. LTD http://www.elna.co.jp/
3 8 11 Shinyokohama 3-8-11 Shinyokohama, kouhoku kouhoku-ku, ku yokohama yokohama-city, city kanagawa kanagawa, 222 222-0033, 0033 JAPAN TEL:045-470-7255 FAX:045-470-7260
.