LM5015 High Voltage Monolithic Two-Switch Forward DC-DC Regulator
December 10, 2007
LM5015 High Voltage Monolithic Two...
LM5015 High Voltage Monolithic Two-Switch Forward DC-DC
Regulator
December 10, 2007
LM5015 High Voltage Monolithic Two-Switch Forward DC-DC
Regulator
General Description
The LM5015 high voltage switch mode
regulator features all the functions necessary to implement efficient high voltage Two-Switch Forward and Two-Switch Flyback
regulators, using a minimum of external components. This easy to use
regulator integrates high side and low side 75 Volt N-Channel MOSFETs with a minimum 1 Amp peak current limit. The voltage across the MOSFETs employed in the two-switch topology is clamped to the input voltage, allowing the input voltage range to approach the rating of the MOSFETs. The
regulator control method is based on current mode control providing inherent ease of loop compensation and line feedforward for superior rejection of input transients. The operating frequency is set with a single resistor and is programmable up to 750 kHz. The oscillator can also be synchronized to an external clock. Additional protection features include cycle-by-cycle current limiting, thermal shutdown, under-voltage lockout and remote shutdown capability. The device is available in the TSSOP-14EP package featuring an exposed die attach pad to enhance thermal dissipation.
Features
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Dual Integrated 75V N-Channel MOSFETs Ultra-wide input voltage range: 4.25V to 75V Integrated high voltage bias
regulator Adjustable output voltage 1.5% feedback reference accuracy Current mod...