WNMP1018

RF AMPLIFIER MODEL WNMP1018 Features ! High IP3: +44 dBm Typical ! High IP2: +75 dBm Typical ! High Output Power: 28 dBm Typical Available as: WNMP1018, 0.625” Sq. 10 Pin Surface Mount - Gullwing BXMP1018, SMA Connectorized Housing Typical Intermodulation Performance at 25 º C Second Order Harmonic Intercept Point ....... +80 dBm (Typ.) Second Order Two Tone Intercept Point ........ +75 dBm (Typ.) Third Order Two Tone Intercept Point ............ +44 dBm (Typ.) Specifications CHARACTERISTIC Frequency Gain (dB) Power @ 1 dB Comp. (dBm) Reverse Isolation (dB) VSWR In Out Noise figure (dB) Power Vdc mA TYPICAL Ta= 25 ºC 1 - 100 MHz 15 +28 -22 1.5:1 1.5:1 4.2 +15 245 MIN/MAX Ta = 0 ºC to +30 ºC 1 - 100 MHz 14.5 Min. +26 Min. -20 Max. 2.0:1 Max. 2.0:1 Max. 5.0 Max. +15 Min. 275 Max. Maximum (No Damage) Ratings Ambient Operating Temperature .............. -55ºC to + 100 ºC Storage Temperature ............................... -62ºC to + 125 ºC Case Temperature ................................................. + 125 ºC DC Voltage ......................................................... + 18 Volts Continuous RF Input Power ................................. + 16 dBm Short Term RF Input Power .... 200 Milliwatts (1 Minute Max.) Maximum Peak Power .................... 0.2 Watt (3 µsec Max.) Note: Care should always be taken to effectively ground the case of each unit. Typical Performance Data Gain (dB) 17 16 15 14 13 Start 1 MHz Stop 100 MHz Reverse Isolation (dB) - 5 - 10 - 15 - ...