Document
HS103DR Series Assemblies
• 55 amp AC output @ 40°C • Single Channel or 3 Phase output • 3 to 32 VDC input control voltage • DIN Rail mounted • UL, CSA, VDE, CE approved SSRs
PRODUCT SELECTION
Description
3-32 VDC Control
55 A
HS103DR-D2490
55 A
HS103DR-HD6090
55 A
HS103DR-D53TP25D
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum I²t for Fusing (8.3 msec) [A² sec] Minimum Power Factor (with Maximum Load)
HS103DR-D2490
24-280 600 10 500 55 0.04 1200 1.6 6000 0.5
HS103DR-HD6090
48-660 1200 10 500 55 0.04 1200 1.7 6000 0.5
HS103DR-D53TP25D
48-530 1200 10 500 55 0.05 250 1.6 260 0.5
INPUT SPECIFICATIONS (1)
Description
Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Maximum Reverse Voltage Typical Input Current Nominal Input Impeadance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec]
HS103DR-D2490
3-32 VDC 3.0 VDC 1.0 VDC 32 VDC 3.4 mA @ 5 VDC 1500 Ohms 1/2 Cycle 1/2 Cycle
HS103DR-HD6090
3-32 VDC 3.0 VDC 1.0 VDC 32 VDC 2.0 mA (3) (3) 1/2 Cycle 1/2 Cycle
HS103DR-D53TP25D
3-32 VDC 3.0 VDC 1.0 VDC 32 VDC 10 mA @ 5 VDC 450 Ohms 1/2 Cycle 1/2 Cycle
GENERAL SPECIFICATIONS
Description
Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Status Indicator Display Weight (typical) Encapsulation Recommended Terminal Screw Torque Range: Thermal pad installed
HS103DR-Dxx90
4000 Vrms
HS103DR-D53TP25D
4000 Vrms
109 Ohms
8 pF -40 to 80˚C -40 to 125˚C None 1.39 lb. (631g) Themally Conductive Epoxy 6-32 Screws - 10 in/lbs. 8-32 Screws - 20 in/lbs. (Screws dry without grease) Yes
109 Ohms
10 pF -40 to 80°C -40 to 125°C None 1.84 lb (859g) Themally Conductive Epoxy 6-32 Screws - 10 in/lbs. 8-32 Screws - 20 in/lbs. (Screws dry without grease) Yes
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Input circuitry for DC control version incorporates active current limiter (HD model only)
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314 Agency approvals are for relay only. E116949 (D2490) E116950 (HD6090, D53TP25D) 10143 UG (D2490, HD6090) VDE 5941 UG (D53TP25D) Rev. 110811 LR81689 (all)
ANNEX - ENVIROMENTAL INFORMATION
.