Technical Specification
NQ40x40QGC30
9-40 V
Continuous Input
0-40 V
Outputs
30 A
Current
NonIsolated
Quarter-brick
D...
Technical Specification
NQ40x40QGC30
9-40 V
Continuous Input
0-40 V
Outputs
30 A
Current
NonIsolated
Quarter-brick
DC-DC Converter
The NiQor® quarter-brick dc-dc converter is a non‑isolated buck-boost
regulator, which employs synchronous
Non-Isolated
rectification to achieve extremely high conversion efficiency. The High Input Voltage NiQor Brick family of converters can be used in traditional DPA (distributed power architecture) systems or provide a regulated output voltage from a battery source or other variable voltage source. The NiQor Brick family can be configured to Buck the input voltage down to a lower voltage or Boost the input voltage up to a higher voltage using a single external resistor. These modules are RoHS 6/6 compliant (see last page).
Operational Features
Ultra high efficiency, up to 95% at full rated load Delivers up to 30 A of output current Input Voltage Range: 9 - 40 V Output voltage range: 0 - 40 V (negative output is possible) Extensive on-board input and output filtering No minimum load requirement means no preload resistors required Buck or buck-boost mode available Adjustable current limit with current monitor (C option)
NiQor quarter-brick module
Protection Features
Input under-voltage lockout protects the converter at low input voltage conditions Over-current shutdown protects converter from excessive load current or short circuits Input/output over-voltage protection protects load and
regulator from damag...