DatasheetsPDF.com

RT100KP150A Dataheets PDF



Part Number RT100KP150A
Manufacturers Microsemi Corporation
Logo Microsemi Corporation
Description Preferred 100 kW Transient Voltage Suppressor
Datasheet RT100KP150A DatasheetRT100KP150A Datasheet (PDF)

RT100KP33A thru RT100KP400CA, e3 SCOTTSDALE DIVISION Preferred 100 kW Transient Voltage Suppressor for AIRCRAFT POWER BUS PROTECTION APPEARANCE WWW . Microsemi . C OM DESCRIPTION Microsemi’s 100 kW Transient Voltage Suppressors (TVSs) are designed for aircraft applications requiring high power transient protection with a comparatively small axial-leaded package size. This includes various threats such as “Waveform 4” at 6.4/69 µs per RTCA/DO-160E Section 22. It is also available with screenin.

  RT100KP150A   RT100KP150A



Document
RT100KP33A thru RT100KP400CA, e3 SCOTTSDALE DIVISION Preferred 100 kW Transient Voltage Suppressor for AIRCRAFT POWER BUS PROTECTION APPEARANCE WWW . Microsemi . C OM DESCRIPTION Microsemi’s 100 kW Transient Voltage Suppressors (TVSs) are designed for aircraft applications requiring high power transient protection with a comparatively small axial-leaded package size. This includes various threats such as “Waveform 4” at 6.4/69 µs per RTCA/DO-160E Section 22. It is also available with screening in accordance with MIL-PRF-19500 or avionics screening as described in the Features section herein. It may also be optionally acquired with RoHS Compliant (annealed matte-Tin finish) with an e3 suffix added to the part number. Microsemi also offers a broad www.DataSheet4U.com spectrum of other TVSs to meet your needs. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES • • • • • Available in both Unidirectional and Bidirectional construction (Bidirectional with CA suffix) TVS selection for 33 to 400 V Standoff Voltages (VWM) Suppresses transients up to 100 kW @ 6.4/69 μs Fast response with less than 5 ns turn-on time. Optional 100% screening for avionics grade is available by adding MA prefix to part number for added 100% temperature cycle -55oC to +125oC (10X), surge (3X) in each direction, 24 hours HTRB in each direction, and post test (VBR and ID) Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, and JANTXV are also available by adding MQ, MX, or MV prefixes respectively to part numbers. Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B. RoHS Compliant devices available by adding “e3” suffix • APPLICATIONS / BENEFITS Protection from high power switching transients, induced RF, and lightning threats with comparatively small package size (0.25 inch diameter) Protection from ESD and EFT per IEC61000-4-2 and IEC61000-4-4 Pin injection protection per RTCA/DO-160E up to Level 4 for Waveform 4 (6.4/69 µs) on all devices Pin injection protection per RTCA/DO-160E up to Level 5 for Waveform 4 (6.4/69 µs) on device types RT100KP33A or CA up to RT100KP260A or CA Pin injection protection per RTCA/DO-160E up to Level 3 for Waveform 5A (40/120 µs) on all devices Pin injection protection per RTCA/DO-160E up to Level 4 for Waveform 5A (40/120 µs) on device types RT100KP33A or CA up to RT100KP64A or CA Consult Factory for other voltages with similar Peak Pulse Power capabilities. • • • • • • • • • MAXIMUM RATINGS • • • • • Peak Pulse Power dissipation at 25ºC: 100 kW at 6.4/69 µs waveform in Figure 8 (also see figures 1 and 2) Impulse repetition rate: 0.005% tclamping (0 volts to VBR min): <100 ps theoretical for unidirectional and <5 ns for bidirectional Operating & storage temperatures: -65oC to +150oC Thermal resistance: 17.5C/W junction to lead, or 77.5C/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads (1 oz ) and track width 1 .


RT100KP130A RT100KP150A RT100KP160A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)