DatasheetsPDF.com

IRM-8601-M Dataheets PDF



Part Number IRM-8601-M
Manufacturers Everlight Electronics
Logo Everlight Electronics
Description Infrared Remote-control Receiver
Datasheet IRM-8601-M DatasheetIRM-8601-M Datasheet (PDF)

EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-027 REV: IRM-8601-M ECN: Page: 1.1 1/8 ■ PACKAGE DIMENSIONS: OFFICE: NO 25,Lane 76,Chung Yang Rd, Sec.3 Tucheng, Taipei 236, Taiwan, R.O.C. TEL FAX : 886-2-2267-2000,2266-9936 ( 22 Lines ) : 886-2-2267-6189 http://www.everlight.com EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-027 REV: IRM-8601-M ECN: Page: 1.1 2/8 ■ NOTES: 1. This drawing measure is a standard value. All dimensions are in millimeter. 2. In .

  IRM-8601-M   IRM-8601-M



Document
EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-027 REV: IRM-8601-M ECN: Page: 1.1 1/8 ■ PACKAGE DIMENSIONS: OFFICE: NO 25,Lane 76,Chung Yang Rd, Sec.3 Tucheng, Taipei 236, Taiwan, R.O.C. TEL FAX : 886-2-2267-2000,2266-9936 ( 22 Lines ) : 886-2-2267-6189 http://www.everlight.com EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-027 REV: IRM-8601-M ECN: Page: 1.1 2/8 ■ NOTES: 1. This drawing measure is a standard value. All dimensions are in millimeter. 2. In case of designation is tolerance ± 0.3mm. 3. Lead spacing is measured where the lead emerge from the package. 4. Protruded resin under flange 1.0mm Max. 5. Lens color: Black. 6. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 7. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT consent. 8. When using this produce, please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. ■ Description: The device is a miniature type infrared remote control system receiver which has been developed and designed by utilizing the most updated IC technology. The PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as an IR filter. The demodulated output signal can directly be decoded by a microprocessor. ■ Feature: High protection ability to EMI and metal case can be customized. Mold type and metal case type to meet the design of front panel. Elliptic lens to improve the characteristic against Line-up for various center carrier frequencies. Low voltage and low power consumption. High immunity against ambient light. Photodiode with integrated circuit. TTL and CMOS compatibility. Long reception distance. 10. High sensitivity. 1. 2. 3. 4. 5. 6. 7. 8. 9. EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-027 REV: IRM-8601-M ECN: Page: 1.1 3/8 ■ Application: 1. Optical switch 2. Light detecting portion of remote control • AV instruments such as Audio, TV, VCR, CD, MD, etc. • Home appliances such as Air-conditioner, Fan , etc. • The other equipments with wireless remote control. • CATV set top boxes • Multi-media Equipment ■ Absolute maximum ratings: Parameter Supply Voltage Operating Temperature Storage Temperature Soldering Temperature Symbol Vcc Topr Tstg Tsol Ratings 0~6 -30〜+85 -40〜+85 260 V ℃ ℃ ℃ 4mm from mold body less than 5 seconds (Ta=25℃) Unit Notice ■ Electro Optical Characteristics: Parameter Supply Voltage Supply Current B.P.F Center Frequency Peak Wavelength Transmission Distance Half Angle (Horizontal) Half Angle (Vertical) High Level Pulse Width Low Level Pulse Width High Level Output Voltage Low Level Output Voltage Symbol Vcc Icc fo λp L0 L45 θh θv TH TL VH VL MIN 4.5 8 4 400 400 4.5 TYP 5 38 940 45 35 0.2 MAX 5.5 3 800 800 0.5 (Ta=25℃) Unit V mA KHz nm m deg deg µs µs V V At the ray axis *2 At the ray axis *1 Condition DC voltage No signal input EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: Device Number: DMO-860-027 REV: IRM-8601-M ECN: Page: 1.1 4/8 ■ Appendix of Page 3: *1:The ray receiving surface at a vertex and relation to the ray axis in the range of φ= 0° and φ=45°. *2:A range from 30cm to the arrival distance. Average value of 50 pulses. ■ TEST METHOD: The specified electro-optical characteristics is satisfied under the following Conditions at the controllable distance. cMeasurement place A place that is nothing of extreme light reflected in the room. dExternal light Project the light of ordinary white fluorescent lamps which are not high Frequency lamps and must be less then 10 Lux at the module surface. (Ee≦10Lux) eStandard transmitter A transmitter whose output is so adjusted as to Vo=400mVp-p and the output Wave form shown in Fig.-1.According to the measurement method shown in Fig.-2 the standard transmitter is specified. However , the infrared photodiode to be used for the transmitter should be λp=940nm,∆λ=50nm. Also, photodiode is used of PD438B(Vr=5V). (Standard light / Light source temperature 2856°K). fMeasuring system According to the measuring system shown in Fig.-3 EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: ■ Block Diagram: Device Number: DMO-860-027 REV: IRM-8601-M ECN: Page: 1.1 5/8 ■ Application Circuit: RC Filter should be connected closely between Vcc pin and GND pin. Fig.-1 Transmitter Wave Form Carrier frequency is adjusted to center frequency of each product. OUTPUT PULSE OF DEVICE D.U.T output Pulse IR TANSMITTER OUTPUT WAVE FORM Duty=0.5 Fig.-2 Measuring Method 20cm 10k +5.0± 0.1V 10uF L: Transmission Distance Fig.-3 Measuring System Vcc OUT D.U.T θ θ Standard Transmitter 100k Vo.


IRM-8601 IRM-8601-M IRM-8601K-1


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)