SG1000

STARLINE® SG1000 Split Third Port Telecommunications Optical Node Installation and Operation Manual RF 4 7 RF 3 3 http://www.Datasheet4U.com Caution These servicing instructions are for use by qualified personnel only. To reduce the risk of electrical shock, do not perform any servicing other than that contained in the Installation and Troubleshooting Instructions unless you are qualified to do so. Refer all servicing to qualified service personnel. Special Symbols Th at Might Appear on the Equipment DANGER INVISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM PEAK POWER 5.0mW WAVELENGTH 1 300nm CLASS II Ib L ASER PR ODUCT THIS PRODUCT COMPLIES WITH 21CFR CHAPTER 1 SU BCHAPTER J This is a class 1 product that contains a class IIIb laser and is intended for operation in a closed environment with fiber attached. Do not look into the optical connector of the transmitter with power applied. Laser output is invisible, and eye damage can result. Do not defeat safety features that prevent looking into optical connector. This product contains a class IIIb laser and is intended for operation in a closed environment with fiber attached. Do not look into the optical connector of the transmitter with power applied. Laser output is invisible, and eye damage can result. Do not defeat safety features that prevent looking into optical connector. This symbol indicates that dangerous voltage levels are present within the equipment. These voltages are not insulated and may be of suf...