25VF080

8 Mbit SPI Serial Flash SST25VF080 SST25VF0808 Mb Serial Peripheral Interface (SPI) flash memory Advance Information FEATURES: Single Voltage Read and Write Operations – 2.7-3.6V for SST25VF080 Serial Interface Architecture – SPI Compatible: Mode 0 and Mode 3 33 MHz Max Clock Frequency Superior Reliability – Endurance: 100,000 Cycles (typical) – Greater than 100 years Data Retention Low Power Consumption: – Active Read Current: 7 mA (typical) – Standby Current: 8 µA (typical) Flexible Erase Capability – Uniform 4 KByte sectors – Uniform 32 KByte overlay blocks Fast Erase and Byte-Program: – Chip-Erase Time: 70 ms (typical) – Sector- or Block-Erase Time: 18 ms (typical) – Byte-Program Time: 14 µs (typical) Auto Address Increment (AAI) Programming – Decrease total chip programming time over Byte-Program operations End-of-Write Detection – Software Status Hold Pin (HOLD#) – Suspends a serial sequence to the memory without deselecting the device Write Protection (WP#) – Enables/Disables the Lock-Down function of the status register Software Write Protection – Write protection through Block-Protection bits in status register Temperature Range – Commercial: 0°C to +70°C – Industrial: -40°C to +85°C Packages Available – 8-lead SOIC 200 mil body width PRODUCT DESCRIPTION SST’s s erial flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package occupying less board space and ultimately lowering total system costs. ...