Document
Current Mode PWM ControllerLatch Shutdown
OB2278
Product Specification
GENERAL DESCRIPTION
OB2278 is a highly integrated current mode PWM control IC optimized for high performance, low standby power and cost effective offline flyback converter applications. PWM switching frequency at normal operation is externally programmable and trimmed to tight range. At no load or light load condition, the IC operates in extended ‘burst mode’ to minimize switching loss. Lower standby power and higher conversion efficiency is thus achieved. VDD low startup current and low operating current contribute to a reliable power on startup design with OB2278. A large value resistor could thus be used in the startup circuit for reduced power loss. The internal slope compensation improves system large signal stability and reduces the possible sub-harmonic oscillation at high PWM duty cycle output. Leading-edge blanking on current sense input removes the signal glitch due to snubber circuit diode reverse recovery and greatly reduces the external component count and system cost in the design. OB2278 offers comprehensive protection coverage including Cycle-by-Cycle current limiting(OCP), VDD Under Voltage Lockout(UVLO), VDD Over Voltage Protection(OVP), VDD Clamp, Gate Clamp, Over Load protection(OLP) and Over Temperature protection (OTP), etc. Different latch shutdown options are offered on OB2278 in different device version. T version supports both OVP and OTP latch shutdown. L version provides all OVP, OTP and OLP latch shutdown control. Excellent EMI performance is achieved with soft switching control at the totem pole gate drive output. OB2278 is offered in SOP-8 and DIP-8 packages.
FEATURES
Power On Soft Start Extended Burst Mode Control For Improved Efficiency and Minimum Standby Power Design ■ Audio Noise Free Operation ■ External Programmable PWM Switching Frequency ■ Internal Synchronized Slope Compensation ■ Low VIN/VDD Startup Current(3uA) and Low Operating Current (2.3mA) ■ Leading Edge Blanking on Current Sense Input ■ Complete Protection Coverage with selective protections for Latch Shutdown o VDD Over Voltage Protection(OVP) – Latch Shutdown o Over Temperature Protection(OTP) – Latch Shutdown o Over Load Protection. (OLP) – Auto recovery or Latch Shutdown o VDD Under Voltage Lockout with Hysteresis (UVLO) o Gate Output Voltage Clamp (16.5V) o Built-in OCP Compensation to Achieve Minimum OPP Variation over Universal AC Input Range.
■ ■
On -B rig ht
©On-Bright Electronics
TYPICAL APPLICATION
Co
nf i den
-1-
tial to
Confidential
APPLICATIONS
Offline AC/DC flyback converter for ■ Adaptor ■ Notebook Adaptor ■ LCD Monitor/TV/PC/Set-Top Box Power Supplies ■ Open-frame SMPS ■ Printer Power
Datasheet OB_DOC_DS_2278A2
Current Mode PWM ControllerLatch Shutdown
OB2278
Package Dissipation Rating
GENERAL INFORMATION
Pin Configuration The pin map of OB2278 in DIP8 and SOP8 package is shown as below.
Package DIP8 SOP8
RθJA (℃/W) 90 150
otherwise noted.
O.