8K SPI Bus Serial EEPROM
Not recommended for new designs – Please use 25AA080A/B or 25LC080A/B.
25AA080/25LC080/25C080
8K SPI Bus Serial EEPROM
...
Description
Not recommended for new designs – Please use 25AA080A/B or 25LC080A/B.
25AA080/25LC080/25C080
8K SPI Bus Serial EEPROM
Device Selection Table
Part Number
25AA080 25LC080 25C080
VCC Range
1.8-5.5V 2.5-5.5V 4.5-5.5V
Max. Clock Frequency
1 MHz 2 MHz 3 MHz
Temp. Ranges
I I I,E
Features:
Low-power CMOS technology:
- Write current: 3 mA maximum
- Read current: 500 A typical
- Standby current: 500 nA typical
1024 x 8-bit organization
16 byte page
Write cycle time: 5 ms max.
Self-timed erase and write cycles
Block write protection:
- Protect none, 1/4, 1/2 or all of array
Built-in write protection:
- Power-on/off data protection circuitry
- Write enable latch
- Write-protect pin
Sequential read
High reliability:
- Endurance: 1 M cycles
- Data retention: > 200 years
- ESD protection: > 4000V
8-pin PDIP and SOIC (150 mil)
Temperature ranges supported:
- Industrial (I):
-40C to +85C
- Automotive (E) (25C080): -40°C to +125°C
Description:
The Microchip Technology Inc. 25AA080/25LC080/ 25C080 (25XX080*) are 8 Kbit Serial Electrically Erasable PROMs. The memory is accessed via a simple Serial Peripheral Interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a Chip Select (CS) input.
Communication to the device can be paused via the hold pin (HOLD). While the device is paused, transitions on its inputs will b...
Similar Datasheet