Connector Fiber Optics
ASSEMBLY INSTRUCTIONS
UTS LC Series
BT 304
http://www.Datasheet4U.com
BT304
| UTS LC Series
Contents
Tool & Materia...
Description
ASSEMBLY INSTRUCTIONS
UTS LC Series
BT 304
http://www.Datasheet4U.com
BT304
| UTS LC Series
Contents
Tool & Material .................................................... 4 UTS LC Component details ................................ 5 UTS LC Dimensions ............................................ 5 Assembly Instructions for UTS1JC18LCN & UTS6JC18LCN ....................... 6 A - Cable preparation ....................................... 6 B - Backshell screwing for UTS1JC18LCN ........ 9 C - Backshell screwing for UTS6JC18LCN ........ 10 Assembly Instructions for UTS718LCN ............... 12 Cleaning & Inspection ........................................ 14 Safety Considerations ......................................... 15
© 2013 SOURIAU
3
UTS LC Series | BT304
Tool & Material
The following tools and materials ar e necessary for preparation, assembly, inspection, and maintenance of the connector and cable assembly. Follow the tool instruction for operation and safety guidelines. TOOLS - Cable jacket strip tool - Aramid Fiber Shears - Fiber Stripping Tool - 15 mm U–wrench - 28 mm U–wrench - 36.5 mm U–wrench - Nipper (Oeticker Standard pincers with straight jaws 14100082) - Heat gun (optional) MATERIAL - LC contact: the UTS LC connector range can adapt all kind of LC contact as defined per IEC 61754-20 - Cable: the UTS LC connector range can adapt all type of standar d cable from 3 to 6mm outer diameter. Above these diameter limits some adaptations ar e necessary - Suggested...
Similar Datasheet