High Brightness LED Driver
BW9910/A High Brightness LED Driver
Features
Product Description
The BW9910/BW9910A is a PWM high-eff...
Description
BW9910/A High Brightness LED Driver
Features
Product Description
The BW9910/BW9910A is a PWM high-efficiency LED driver control IC. It allows efficient operation of high brightness (HB) LEDs from voltage sources ranging from 85VAC up to 265VAC. The BW9910/BW9910A controls an external MOSFET at fixed switching frequency up to 300kHz. The frequency can be programmed using a single resistor. The LED string is driven at constant current rather than constant voltage, thus providing constant light output and enhanced reliability. The output current can be programmed between a few mA and up to more than 1.0A. The BW9910/BW9910A uses a rugged high voltage junction isolated process that can withstand an input voltage surge of up to 500V. Output current to an LED string can be programmed to any value between zero and its maximum value by applying an external control voltage at the linear dimming control input of the BW9910/BW9910A. The BW9910/BW9910A provides a low-frequency PWM dimming input that can accept an external control signal with a duty ratio of 0%~100% and a frequency of up to a few kHz. The BW9910A allows wider range of external MOSFET which has lower RDS(ON) (drain-source on resistance) at higher VGS. The BW9910/BW9910A is available in SOP-8 and SO8-EP packages.
Efficiency > 90% Universal rectified 85VAC to 265VAC input range Constant current LED driver Applications from a few mA to more than 1.0A LED string from one to hundreds of diodes PWM low-freque...
Similar Datasheet