E3Z-G

Grooved-type Photoelectric Sensor with Built-in Amplifier E3Z-G CSM_E3Z-G_DS_E_5_1 Grooved Design Eliminates Optical Axis Adjustment One- and two-axis models available. Provides mutual interference prevention and EN standard compliance. Be sure to read Safety Precautions on page 4. Ordering Information Sensors (Refer to Dimensions on page 4.) Sensing method Appearance Connection method Pre-wired (2 m) Pre-wired Connector (M8, 4 pins) 1 E3Z-G61-M3J 0.3M E3Z-G81-M3J 0.3M E3Z-G82 2M E3Z-G82-M3J 0.3M Sensing distance No. of optical axes Model NPN output E3Z-G61 2M * PNP output E3Z-G81 2M Infrared light Through-beam 25 mm Pre-wired (2 m) Pre-wired Connector (M8, 4 pins) 2 E3Z-G62-M3J 0.3M E3Z-G62 2M * Note: Models with a 0.5-m cable are available. When ordering, specify the cable length by adding the code "0.5M" to the model number (e.g., E3Z-G61 0.5M). * The following table shows the model numbers of e-CON Pre-wired Connectors that are available. The Ratings and Specifications are the same as those for the E3ZG61/G62. No. of optical axes 1 axis Cable length 0.3 m 0.5 m 2m 0.3 m Model E3Z-G61-ECON 0.3M E3Z-G61-ECON 0.5M E3Z-G61-ECON 2M E3Z-G62-ECON 0.3M E3Z-G62-ECON 0.5M E3Z-G62-ECON 2M 2 axes 0.5 m 2m Accessories (Order Separately) Sensor I/O Connectors (Refer to Dimensions on XS3.) Cable specification Appearance Type of cable 2m 5m 2m Model XS3F-M421-402-A 4-wire XS3F-M421-405-A XS3F-M422-402-A XS3F-M422-405-A Straight Standard cable L-shape Note: Refer to In...