Low drop adjustable positive voltage regulator
BA1117FP
●Features
Low dropout voltage: - 1.2 V typ. (at IO = 1 A, 25℃...
Low drop adjustable positive voltage
regulator
BA1117FP
●Features
Low dropout voltage: - 1.2 V typ. (at IO = 1 A, 25℃) Output current up to 1 A Adjustable version availability (VREF = 1.25 V) Internal current and thermal limit Available in ±1% (at 25℃) and 2% in full temperature range High supply voltage rejection: - 75 dB typ. (at 25℃) Temperature range: -20℃ to 105℃ Designed to use by ceramic capacitors
TO252-3
TO220-3
●Typical Application
V IN
10uF
●Description
The BA1117FP is a low drop voltage
regulator able to provide up to 1 A of output current, available in adjustable versions (VREF =1.25V). The device is supplied in: TO252-3 and TO220-3. Surface mounted packages optimize the thermal characteristics while offering a relevant space saving advantage. High efficiency is assured by
NPN pass
transistor. Only a very common 22uF minimum capacitor is needed for stability. Chip trimming allows the
regulator to reach a very tight reference voltage tolerance, within ±1% at 25℃.
V OUT
V REF
ADJ
IADJ
R1
22uF
R2
VREF = 1.25 V (Typ.) IADJ = 60 uA (Typ.) VO = VREF × (1 + R2 / R1 ) + IADJ × R2
Table1.
Device summary
Order codes TO220-3 Under development Output voltage Adjustable from 1.25 V
TO252-3 BA1117FP-E2
○Product structure:Silicon monolithic integrated circuit www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. TSZ22111・14・001
○This product is not designed protection against radioactive rays.
1/12
TSZ02201-0RGR0A600450-1-2 18.Nov.2013 Rev.00...