Memory Back-Up Capacitors
FEATURES • SMALLER THAN NEXA SERIES • DOUBLE LAYER CONSTRUCTION • SHORT TERM POWER SOURCE (UP TO 50mA) • SUITABLE FOR FLOW SOLDERING • LEAD-FREE FINISH CHARACTERISTICS
Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Load Life Test @ 85°C 1,000 hours Temperature Cycling (5 cycles, -40 ~ +85°C 5.5VDC 0.1F ~ 5.6F (100,000μF ~ 5,600,000μF) -40°C ~ +85°C +80%/-20% (Z) Δ Capacitance Change Maximum ESR Current at 30 minutes Δ Capacitance Change Maximum ESR Current at 30 minutes Δ Capacitance Change Maximum ESR Current at 30 minutes
NEXT Series
Super Capacitor Application Guide
Less than ±30% of initial measured value Less than 200% of the specified maximum value Less than 200% of the specified maximum value Within +80%/-20% of specified value Less than specified maximum value Less than specified maximum value Less than ±20% of initial measured value Less than 120% of the specified maximum value Less than 120% of the specified maximum value
Humidity Resistance (240 hours @ 40°C/90% RH)
STANDARD VALUES AND SPECIFICATIONS
NIC P/N NEXT104Z5.5V11.5X8.5F NEXT224Z5.5V14.5X12F NEXT474Z5.5V16.5X13F NEXT105Z5.5V21.5X13F NEXT225Z5.5V28.5X14F NEXT335Z5.5V36.5X15F NEXT565Z5.5V44.5X17F Capacitance Value (F) Charge Discharge 0.10 0.22 0.47 1.0 2.2 3.3 5.6 0.14 0.28 0.60 1.3 2.8 4.2 7.2 Rated Voltage (VDC) 5.5 5.5 5.5 5.5 5.5 5.5 5.5 Max. Current @ 30 minutes (mA) < 0.15 <0.33 <0.71 <1.5 <3.3 <5.0 <8.4 Max. ESR @ 1KHz (Ω) <16 <10 <6.5 <3.5 <1.8 <1.0 <0.6
D ±0.5
Typical DCR (Ω) 23 16 5.4 2.9 2.1 1.3 0.8
CASE DIMENSIONS (mm)
NIC P/N NEXT104Z5.5V11.5X8.5F NEXT224Z5.5V14.5X12F NEXT474Z5.5V16.5X13F NEXT105Z5.5V21.5X13F NEXT225Z5.5V28.5X14F NEXT335Z5.5V36.5X15F NEXT565Z5.5V44.5X17F DIMENSIONS (mm) D 11.5 14.5 16.5 21.5 28.5 36.5 44.5 H 8.5 12.0 13.0 13.0 14.0 15.0 17.0 S 5.08 5.08 5.08 7.62 10.16 15.0 20.0 LL 4.1 ± 1.0 3.4 ± 1.0 5.1 ± 1.0 4.5 ± 1.5 8.0 ± 1.5 8.7 ± 2.0 7.5 ± 2.0 d1 0.4 0.4 0.4 0.6 0.6 0.6 1.0 d2 1.2 1.2 1.2 1.2 1.4 1.7 1.4
LL H max.
-
S ±0.5
+ +
0.3mm min.
TERMINATION FINISH: Pb-FREE (99%Sn/1%Cu) d2 ±0.1
d1 ±0.1 PRECAUTIONS
WASHING is NOT RECOMMENDED. Additional guidelines and precautions can be found at www.niccomp.com/precautions If in doubt or uncertainty, please review your speci fic application - process details with NIC’s technical support personnel:
[email protected]
NIC COMPONENTS CORP. www.niccomp.com
www.lowESR.com
www.RFpassives.com
www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
http://www.Datasheet4U.com
1
.