1.65V Minimum SPI Serial Flash Memory
AT45DB041E
4-Mbit DataFlash (with Extra 128-Kbits), 1.65V Minimum SPI Serial Flash Memory
Features
Single 1.65V - 3.6...
Description
AT45DB041E
4-Mbit DataFlash (with Extra 128-Kbits), 1.65V Minimum SPI Serial Flash Memory
Features
Single 1.65V - 3.6V supply Serial Peripheral Interface (SPI) compatible
Supports SPI modes 0 and 3 Supports RapidS™ operation Continuous read capability through entire array Up to 85MHz Low-power read option up to 15 MHz Clock-to-output time (tV) of 6ns maximum User configurable page size 256 bytes per page 264 bytes per page (default) Page size can be factory pre-configured for 256 bytes Two fully independent SRAM data buffers (256/264 bytes) Allows receiving data while reprogramming the main memory array Flexible programming options Byte/Page Program (1 to 256/264 bytes) directly into main memory Buffer Write Buffer to Main Memory Page Program Flexible erase options Page Erase (256/264 bytes) Block Erase (2KB) Sector Erase (64KB) Chip Erase (4-Mbits) Program and Erase Suspend/Resume
Advanced hardware and software data protection features
Individual sector protection Individual sector lockdown to make any sector permanently read-only 128-byte, One-Time Programmable (OTP) Security Register 64 bytes factory programmed with a unique identifier 64 bytes user programmable Hardware and software controlled reset options
JEDEC Standard Manufacturer and Device ID Read Low-power dissipation
400nA Ultra-Deep Power-Down current (typical) 3μA Deep Power-Down current (typical) 25μA Standby current (typical at 20MHz) ...
Similar Datasheet