DatasheetsPDF.com

CX3HSM Dataheets PDF



Part Number CX3HSM
Manufacturers STATEK
Logo STATEK
Description Low Profile Surface Mount Quartz Crystal
Datasheet CX3HSM DatasheetCX3HSM Datasheet (PDF)

CX3HSM CRYSTAL 18 kHz to 600 kHz Low Profile Surface Mount Quartz Crystal for Series Oscillators DESCRIPTION The CX3HSM quartz crystals are leadless devices designed for surface mounting on printed circuit boards or hybrid substrates. These miniature crystals are intended to be used in Series oscillators. They are hermetically sealed in a rugged, miniature ceramic package. They are manufactured using the STATEKdeveloped photolithographic process, and were designed utilizing the experience acqu.

  CX3HSM   CX3HSM


Document
CX3HSM CRYSTAL 18 kHz to 600 kHz Low Profile Surface Mount Quartz Crystal for Series Oscillators DESCRIPTION The CX3HSM quartz crystals are leadless devices designed for surface mounting on printed circuit boards or hybrid substrates. These miniature crystals are intended to be used in Series oscillators. They are hermetically sealed in a rugged, miniature ceramic package. They are manufactured using the STATEKdeveloped photolithographic process, and were designed utilizing the experience acquired by producing millions of crystals for industrial, commercial, military and medical applications. Maximum process temperature should not exceed 260O C. FEATURES actual size Glass Lid Shown PACKAGE DIMENSIONS D side view A TOP D BOTTOM Miniature tuning fork design High shock resistance Designed for low power applications Compatible with hybrid or PC board packaging Low aging Full military testing available Designed and manufactured in the USA DIM A B C D E EQUIVALENT CIRCUIT B C D E TYP. inches 0.263 0.097 0.052 0.030 mm 6.68 2.46 1.32 0.76 inches 0.270 0.104 0.058 0.035 MAX. mm 6.86 2.64 1.47 0.89 see below C0 1 L1 C1 R1 2 DIM “C“” MAX SM1 SM2/SM4 SM3/SM5 GLASS LID inches 0.053 0.055 0.058 mm 1.35 1.40 1.47 CERAMIC LID inches 0.067 0.069 0.072 mm 1.70 1.75 1.83 R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance CONVENTIONAL SERIES OSCILLATOR CIRCUIT Rf SUGGESTED LAND PATTERN 0.070 (1.78) OSCILLATOR 0.110 (2.79) CX3H XTAL CA RA RB BUFFER Contact factory for design guidelines inches (mm) 0.210 (5.33) 10146 - Rev E STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com http://www.Datasheet4U.com SPECIFICATIONS FIGURE 1 CX3H TYPICAL MOTIONAL RESISTANCE (R1) (in 1000's) Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Frequency Range 18 kHz to 600 kHz Functional Mode Tuning Fork (Flexure) Standard Calibration Tolerance1 (see table below) Motional Resistance (R1) See Figure 1 MAX: 18-25 kHz, 2x Typ. 25-600 kHz, 2.5x Typ. Motional Capacitance (C1) Figure 2 Quality Factor (Q) Figure 3 MIN is 0.25x Typ. 1.8 pF MAX. Shunt Capacitance (C0) Drive Level 18-24.9 kHz 0.5 µW MAX. 25-600 kHz 1.0 µW MAX. Turning Point (T0)2 Figure 4 Temperature Coefficient (k) -0.035 ppm/0C2 Aging, first year 5 ppm MAX 3 Shock, survival 1,500 g, 0.3 ms, 1/2 sine Vibration, survival3 10 g RMS, 20-2,000 Hz random Operating Temp. Range -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) Storage Temp. Range -55OC to +125OC Max Process Temperature 260OC for 20 sec. 1. Other calibration values available, consult factory. 2. Other turning point available. 3. Higher shock and vibration available. 1000 500 200 100 50 20 10 18 50 100 200 600 R1(k⍀) Frequency (kHz) FIGURE 2 CX3H TYPICAL MOTIONAL CAPACITANCE (C1) 5 C1(fF) 2 1.0 0.5 18 50 Frequency (kHz) 100 200 600 FIGURE 3 CX3H TYPICAL QUALITY FACTOR (Q) 50 20 10 5 2 CX3H Standard Calibration T olerance at 25OC 18 50 Frequency Range (kHz) 18-74.9 30 ppm (0.003%) + _ + _ Frequency (kHz) 100 200 600 75-169.9 50 ppm (0.005%) + _ + _ 170-249.9 + _ 250-600 + _ FIGURE 4 CX3H TYPICAL TURNING POINT TEMP . (T0) 100 ppm (0.01%) 200 ppm (0.02%) 200 ppm (0.02%) + _ 1000 ppm (0.1%) + _ 1000 ppm (0.1%) + _ 2000 ppm (0.2%) + _ 5000 ppm (0.5%) PACKAGING OPTIONS TO( C) O 100 ppm (0.01%) 100 ppm (0.01%) + _ + _ 500 ppm (0.05%) +80 +70 +60 +50 +40 +30 +20 +10 0 -10 -20 CX3HSM - Tray Pack - Tape and Reel (Reference tape and reel data sheet 10109) HOW TO ORDER CX3HSM CRYSTALS CX3H S C SM1 32.0K Frequency K = kHz 18 50 Frequency (kHz) 100 200 600 Note: Frequency f at temperature T is related to frequency f0 at turning point temperature T0 by: f-f0 = k(T-T )2 0 f0 , 30 / I TERMINATIONS Blank = Glass Lid C = Ceramic Lid “S” if special or custom design. Blank if Std. SM1 = Gold Plated SM2 = Solder Plated SM3 = Solder Dipped SM4 = Solder Plated (Lead Free) SM5 = Solder Dipped (Lead Free) Calibration Operating Temp. Range: Tolerance C = -10OC to +70OC @ 25OC I = -40OC to +85OC (in ppm) M = -55OC to +125OC S = Customer Specified Designation SM1 SM2 SM3 SM4 SM5 Termination Gold Plated Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) 10146 - Rev E STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com .


CX3HGSM CX3HSM CX6SM


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)