CPC510

CPC510 3U CompactPCI CPU board http://www.gwtusa.com http://www.Datasheet4U.com CPC510 3U CompactPCI CPU board Expansion modules A number of interfaces output from the board may be increased by means of connecting MIC584, KIC550 modules and a MIC590 board MIC584 module interfaces: 2xUSB 2.0 2xSATA Audio IN/OUT/MIC 4xRS 232 2xRS 485 LPT PS/2 keyboard+mouse – Dual channel LVDS Interface (25 MHz 112 MHz, up to 224 Mpixel/sec) is switched between a connector at the board and via a RIO backplane. – Support for a TF T panel power management with a 3.3V power voltage and illumination circuits with a 5 V or a 12 V power voltage. CompactPCI Bus – 32 bits, clock frequency of 33/66 MHz – Operation mode System Master, suppor t for up to seven Bus Mastering devices – Support for the PCI Local Bus Rev. 3.0 Specification – 3.3V and 5V VIO Suppor t PCI Express Bus – 3 ports x1 (a through route for the PCI Express PCH ports of the CPC510 module) – Complies with the PCI Express 1.0a Specification. – Complies with the PICMG 2.30 Compact PCI PlusIO Specification. – Allows for a module binding CPC510+MIC590 installation into a hybrid backplane, complies with the PICMG 2.30 specification. A simultaneous support for four Legacy CompactPCI peripheral devices and for three Compact PCI Serial peripheral devices is provided with that. Though SATA and USB interconnects, which are parts of the PICMG 2.30 Specification, are not available. Power Source: – The MIC590 module power con...