DatasheetsPDF.com

ESMM251VSN182MA50T Dataheets PDF



Part Number ESMM251VSN182MA50T
Manufacturers United Chemi-Con
Logo United Chemi-Con
Description capacitor
Datasheet ESMM251VSN182MA50T DatasheetESMM251VSN182MA50T Datasheet (PDF)

SMM SERIES SMM Series Ⅲ Engineering Bulletin Mar 07 Snap Mount Ⅲ Downsize Ⅲ High Voltage Ⅲ Long Life Ⅲ RoHS Compliant Ⅲ ‫؀‬85؇C Maximum Temperature The SMM series is a high voltage, long life snap -in capacitor series that offers downsized versions of the SMH series. Compared to our SMH series, the SMM capacitors have a longer rated lifetime of 3,000 hours with the full rated ripple curr ent applied and are also one case size smaller than equivalently rated SMH capacitors. These characteristi.

  ESMM251VSN182MA50T   ESMM251VSN182MA50T


Document
SMM SERIES SMM Series Ⅲ Engineering Bulletin Mar 07 Snap Mount Ⅲ Downsize Ⅲ High Voltage Ⅲ Long Life Ⅲ RoHS Compliant Ⅲ ‫؀‬85؇C Maximum Temperature The SMM series is a high voltage, long life snap -in capacitor series that offers downsized versions of the SMH series. Compared to our SMH series, the SMM capacitors have a longer rated lifetime of 3,000 hours with the full rated ripple curr ent applied and are also one case size smaller than equivalently rated SMH capacitors. These characteristics allow downsizing for many power supplies and will provide better reliability due to increased life. The SMM capacitors are available in 2 or 4-pin snap-in styles and 4-pin straight terminals. The SMM series capacitors are RoHS compliant offering Pb-free construction. The standard SMM series capacitors are not solvent proof. Refer to guidelines and precautions on the website for usage and installation conditions recommended for United Chemi-Con products. SNAP MOUNT 85؇ C SMM Summary of Specifications Ⅲ PC board 2 or 4-pin snap-in; optional 4-pin straight terminals. Ⅲ Capacitance range: 47 to 3,300μF. Ⅲ Voltage range: 160 to 450VDC. Ⅲ Category temperature range: ‫؁‬25؇C to ‫؀‬85؇C. Ⅲ Leakage current: 3 CV (μA) maximum after 5 minutes at ‫؀‬20؇C. Ⅲ Standard capacitance tolerance: ؓ20% Ⅲ Nominal case size (D‫؂‬L): 20‫؂‬25mm to 35‫؂‬50mm. Ⅲ Rated lifetime: 3,000 hours at ‫؀‬85؇C with the rated ripple current applied. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 1/ 11 http://www.Datasheet4U.com SMM Series SMM Specifications - Snap Mount Item Category Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current Dissipation Factor ( Tan ␦) ‫؁‬25 to ‫؀‬85؇C 160 to 450VDC 47 to 3,300␮F ؓ20% ( M ) at ‫؀‬20؇C, 120Hz I ≤ 3 CV ( ␮A ) after 5 minutes at ‫؀‬20؇C. Characteristics Engineering Bulletin Mar 07 Where I = Max. leakage current ( ␮A ), C = Nominal capacitance ( ␮F ) and V = Rated voltage ( V ) At ‫؀‬20؇C, 120Hz Rated Voltage ( V ) Tan ␦ ( DF ) Max. 160 - 400 0.15 420 - 450 0.20 Low Temperature Characteristics At 120Hz, impedance ( Z ) ratio between the ‫؁‬25؇C value and ‫؀‬20؇C value shall not exceed the values given below. Rated Voltage ( V ) Z (‫؁‬25؇C ) / Z (‫؀‬20؇C ) 160 - 400 4 420 - 450 8 Rated Ripple Current Multipliers Ambient Temperature ( ؇C ) ‫؀‬45؇C 1.73 ‫؀‬60؇C 1.50 ‫؀‬70؇C 1.32 ‫؀‬85؇C 1.00 Frequency (Hz ) SNAP MOUNT 85؇ C DC Rated Voltage 160 - 250V 315 - 450V 50Hz 0.81 0.77 120Hz 1.00 1.00 300Hz 1.17 1.16 1kHz 1.32 1.30 10kHz 1.45 1.41 50kHz 1.50 1.43 SMM Endurance (Load Life) The following specifications shall be satisfied when the capacitors are restored to ‫؀‬20؇C after subjecting them to DC voltage for 3,000 hours at ‫؀‬85؇C with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors. Capacitance change: ≤ ؓ20% of initial measured value Tan ␦ ( DF ) : ≤ 200% of initial specified value Leakage current : ≤ initial specified value Shelf Life The following specifications shall be satisfied when the capacitors are restored to ‫؀‬20؇C after exposing them for 1,000 hours at ‫؀‬85؇C without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements. Capacitance change: ≤ ؓ15% of initial measured value Tan ␦ ( DF ) : ≤ 150% of initial specified value Leakage current : ≤ initial specified value 2 / 11 United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com SMM Series Diagram of Dimensions - Snap Mount Snap Mount Types VSN Ø 20~ Ø 35; VNN Ø 22~ Ø 35 See Pin Detail Engineering Bulletin Mar 07 Unit: mm Type VRD Ø 35 See Pin Detail A* Pb-free PVC Sleeve PC board pin-out Pb-free PVC Sleeve B C* PC board pin-out D‫ם‬1 2-2x 10 D35‫ם‬1 30° 22.5 ** Vent L‫ע‬2 ** Vent L‫ע‬2 2-4x Type VND Ø 35 See Pin Detail A* D35‫ם‬ 1 Type VQD Ø 35 See Pin Detail A* 22.5 D35‫ם‬1 Pb-free PVC Sleeve B C* PC board pin-out Pb-free PVC Sleeve B C* PC board pin-out 30° 30° 22.5 ** Vent L‫ע‬2 2-4x ** Vent L‫ע‬2 2-4x SNAP MOUNT 85؇ C SMM VS & VN Pin Dimensions VR & VQ Pin Dimensions VR Straight Pin VQ Standoff Pin W1 Edge of can W P P1 Edge of can W2 W1 Edge of can W1 W P W P Type VSN Ø 20 - Ø 30 VSN Ø 35 VNN Ø 22 - Ø 35 VND Ø 35 P 4.0ؓ0.5 3.5ؓ0.5 5.8ؓ1.0 5.8ؓ1.0 W 1.5ؓ0.2 W1 W2 1.0 1.0 Type Straight Pin (VR) Standoff Pin (VQ) P 5.50ؓ1.0 3.75ؓ1.0 P1 — 2.0 max. W 1.5ؓ0.1 W1 0.7 CAUTION: * Use the blank terminals for mechanical support only. The blank terminals must not be connected to a solder trace on the PC board, but be electrically isolated from the negative or positive terminal. ** Vent may be located either on the bottom or side of the can. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 T.


ESMM251VSN152MA40T ESMM251VSN182MA50T ESMM351VSN101MN25T


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)