L220

Platinum Resistance Temperature Detector L 220 L series PRTDs are designed for large volume applications where long term stability, interchangeability and accuracy over a large temperature range are vital. Typical applications are Automotive, White goods, HVAC, Energy management, Medical and Industrial equipment. Nominal Resistance R0 Toler ance DIN EN 60751 1996-07 Clas s 1/ 3 B Class A Class B Class B Class A Tolerance DIN EN 60751 2009-05 F 0,1 F 0,15 F 0,3 F 0,3 F 0,15 Or der Number Plastic Box 32 207 588 32 207 584 32 207 400 32 207 733 32 207 738 100 Ohm at 0°C 1000 Ohm at 0°C The measuring point for the nominal resistance is defined at 8mm from the end of the sensor body. Specification Temperature range DIN EN 60751 (according to IEC 751) -50° C to +400° C (continuous operation) Tolerance Class B: -50° C to +400°C Tolerance Class A: -50° C to +300°C Tolerance Class 1/3 B: 0° C to +150° C TCR = 3850 ppm/K AgPd- wire 10mm ±1mm max. R0-drift 0.04% after 1000 h at 400°C at least 40g acceleration at 10 to 2000 Hz, depends on installation at least 100g acceleration with 8ms half sine wave, depends on installation unhoused for dry environments only > 100 MΩ at 20°C; > 2 M Ω at 400° C 0.4 K/mW at 0° C water current (v= 0.4 m/s): air stream (v= 2 m/s): 100Ω: 0.3 to 1.0mA 1000Ω: 0.1 to 0.3mA (self heating has to be considered) Other tolerances, values of resistance and wire lengths are available on request. t0.5 = 0.06s t0.9 = 0.20s t0.5 = 3.0s t0.9 = 13.0s Temperature c...