L1020

Platinum Resistance Temperature Detector L 1020 L series PRTDs are designed for large volume applications where long term stability, interchangeability and accuracy over a large temperature range are vital. Typical applications are Automotive, White Goods, HVAC, Energy Management, Medical and Industrial equipment. Nominal Resistance R0 Tolerance DIN EN 60751 1996-07 Class 1/3 B Class A Class B Class 1/3 B Class A Class B Tolerance DIN EN 60751 2009-05 F 0,1 F 0,15 F 0,3 F 0,1 F 0,15 F 0,3 Order Number Plastic Box 100 Ohm at 0°C 1000 Ohm at 0°C 32 207 585 32 207 579 32 207 708 32 207 586 32 207 581 32 207 710 The measuring point for the nominal resistance is defined at 8mm from the end of the sensor body. Specification Temperature range DIN EN 60751 (according to IEC 751) -50°C to +400°C (continuous operation) Tolerance Class B: -50°C to +400°C Tolerance Class A: -50°C to +300°C Tolerance Class 1/3B: 0°C to +150°C TC = 3850 ppm/K AgPd- wire 10mm ±1mm max. R0-drift 0.04% after 1000h at 400 °C at least 40g acceleration at 10 to 2000 Hz, depends on installation at least 100g acceleration with 8ms half sine wave, depends on installation unhoused for dry environments only > 100 M at 20°C; > 2 M at 400°C 0.2 K/mW at 0°C water current (v = 0.4m/s): air stream (v = 2m/s): 100: 0.3 to 1.0mA 1000: 0.1 to 0.3mA (self heating has to be considered) Other tolerances, values of resistance and wire lengths are available on request. t0.5 = 0.12s t0.9 = 0.30s t0.5 = 6.0s t0.9 = 20.0...