SURFACEMOUNTABLEINPUTRECTIFIERDIODE
Bulletin I2134 rev. C 03/99
SAFEIR Series 20ETS..FP
INPUT RECTIFIER DIODE TO-220 FULLPAK
Description/Features
The 20ETS...
Description
Bulletin I2134 rev. C 03/99
SAFEIR Series 20ETS..FP
INPUT RECTIFIER DIODE TO-220 FULLPAK
Description/Features
The 20ETS..FP rectifier SAFE IR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. Fully isolated package (VINS = 2500 VRMS). UL E78996 approved
VF
< 1V @ 10A
IFSM = 300A VRRM 800 to 1600V
Output Current in Typical Applications Applications
Capacitive input filter TA = 55°C, T J = 125°C, common heatsink of 1°C/W
Single-phase Bridge
18
Three-phase Bridge
22
Units
A
Major Ratings and Characteristics Characteristics
IF(AV) Sinusoidal waveform VRRM IFSM VF TJ @ 10 A, TJ = 25°C
Package Outline
20ETS..FP Units
20 800 to 1600 300 1.0 - 40 to 150 A V A V °C
TO-220 FULLPAK
www.irf.com
1
20ETS..FP SAFEIR Series
Bulletin I2134 rev. C 03/99
Voltage Ratings
VRRM, maximum Part Number peak reverse voltage V
800 1200 1600
VRSM , maximum non repetitive peak reverse voltage V
900 1300 1700
IRRM 150°C mA
1
20ETS08FP 20ETS12FP 20ETS16FP
Provide terminal coating for voltages above 1200V
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current IFSM I2 t Max. Peak One Cycle Non-Repetitive Surge Current Max. I2t for fusing
20ETS..F...
Similar Datasheet