DatasheetsPDF.com

ZX64-B-SLDA Dataheets PDF



Part Number ZX64-B-SLDA
Manufacturers HRS
Logo HRS
Description Micro-USB connectors
Datasheet ZX64-B-SLDA DatasheetZX64-B-SLDA Datasheet (PDF)

NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. sOverview Extremely small high reliability connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB 2.0). Receptacles and plugs are available in a wide variety of mounting and termination configurations, permitting their use in various applications. Drop-in (Mid-mount) Revers.

  ZX64-B-SLDA   ZX64-B-SLDA


Document
NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. sOverview Extremely small high reliability connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB 2.0). Receptacles and plugs are available in a wide variety of mounting and termination configurations, permitting their use in various applications. Drop-in (Mid-mount) Reverse (Top mount) sFeatures 1. Size reduction Compared with the standard Mini-B connectors, the size of ZX connectors is reduced by approximately 60% while still allowing a high-speed data transfer of 480 Mbps, specified in USB 2.0. Standard (Bottom mount) 2. Receptacle styles Two interface configurations: Micro-B and Micro-AB in standard, mid-mount and reverse mounting styles. SMT and through-hole (shell) PC board terminations 3. Plug styles Corresponding to the receptacle styles, two interface configurations: Micro-B and Micro-A, with direct wire or PCB wire soldering. Several plug styles can be used for data transmission, earphone or charging applications. USB 2.0 Hi-Speed (480 Mbps) Eye pattern measurement results: Measured with USB 2.0 cable 2.4 m long 4. High durability Unique contact and lock configuration assures high durability while maintaining easy insertion / disconnection. Fully mated condition (when mated with corresponding HRS connector) is confirmed by a definite tactile sensation 200 mV/div TP2 500ps/div 2010.8 1 http://www.Datasheet4U.com ZX SeriesqMicro-USB connectors meeting requirements of USB 2.0 Standard sSpecifications 1 A (per contact) or Ratings Current rating 1.8 A (contacts No. 1 and 5) and 0.5 A (contacts No. 2, 3, and 4) Item 1. Contact resistance 2. Withstanding voltage 3. Capacitance 4. Durability 5. Total insertion/removal force 30 mø max. No flashover or insulation breakdown 2 pF max. Contact resistance: Rise from initial value of 10 mø max. Insertion force: 35 N max., Removal force: 8 N min. Specification 100 mA 100 V AC / 1 minute Between adjacent contacts at 1,000 Hz (AC voltage) 10,000 cycles Mated with corresponding connector Voltage rating Operating temperature range Storage temperature range Conditions 30 V AC -30°C to +85 °C (Note1) -30 °C to +85°C Note1: Includes temperature rise caused by current flow. Note2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. sMaterials qReceptacles Part Insulator Contacts Shell Material LCP Copper alloy Stainless steel Finish Micro-B: Black, Micro-AB: Gray Selective gold plated Tin alloy plating Remarks UL94V-0 ----------------------------- qPlugs Part Insulator Contacts Lock spring Shell Material Synthetic resin Copper alloy Stainless steel Stainless steel Finish Micro-A: White, Micro-B: Black Selective gold plated Remarks UL94V-0 ------------------------------------------ZX 10's: Right-angle PCB wire, SMT 20's: Straight, PCB wire 40's: Direct wire 60's: Right-angle, PCB wire 80's: Cradle SMT Standard (Bottom mount) Standard (Bottom mount) through hole Reverse (Top mount) Reverse (Top mount) through hole Drop-in (Mid-mount) Micro-A Micro-B Micro-AB 5 Receptacle- Male Plug – Female SMT Through hole (solder tab length: 0.8mm) Assembly (Insulator/contact/lock) Cover (Note 1) --------------Nickel plated or unfinished sOrdering information qReceptacles 1 Series name 2 Termination style ZX 62 RD - B - 5 P * 8 1 2 3 4 5 6 7 8 3 Board mounting style (Receptacles) qPlugs ZX 40 - B - 5 S * - UNIT 1 2 4 5 6 7 9 4 Mating side configuration 5 Number of contacts 6 Contact type 7 Serial No. 8 Shell termination style – ZX 40 - B - SLDA 1 2 4 9 Blank D R RD M A B AB P S Blank 8 UNIT SLD* sProduct Styles Table Interface Micro-A Receptacle Plug Receptacles 9 Components-plugs Note 1: Classifiers such as A, B, and C are entered for *. Micro-B Micro-AB 2 http://www.Datasheet4U.com ZX SeriesqMicro-USB connectors meeting requirements of USB 2.0 Standard sConfigurations Mating side Mounting, termination Application configuration styles/wire attachment Part Number 3D Image Page SMT Standard ZX62-B-5PA(11) 4 SMT + DIP Micro-B Reverse ZX62D-B-5PA8 4 SMT ZX62R-B-5P 5 R e c e p t a c l e s Drop-in SMT ZX62M-B-5P(02) 5 SMT Standard ZX62-AB-5PA(11) 6 SMT + DIP Micro-AB ZX62D-AB-5P8 6 SMT Reverse ZX62R-AB-5P 7 SMT + DIP ZX62RD-AB-5P8 7 Direct wire soldering Data PCB wire soldering (right angle, through hole) Assembly :ZX40-B-5S-UNIT(12) (insulator/contacts/lock) Cover-top :ZX40-B-SLDA Cover-bottom :ZX40-SLDB Assembly :ZX10-B-5S-UNIT(12) (insulator/contacts/lock) Cover-top :ZX10-B-SLDA Cover-bottom :ZX10-SLDB(3.3) 9 and 10 11 and 12 P l u g s Micro-B Earphone PCB wire soldering Assembly :ZX20-B-5S-UNIT(12) (insulator/contacts/lock) (straight, through hole) Cover :ZX20-B-SLDC PCB wire soldering.


ZX64-B-5S-UNIT ZX64-B-SLDA ZX64-SLDB


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)