Document
NEW
Micro-USB connectors meeting requirements of USB 2.0 Standard
ZX Series
Note: Contact us to ascertain whether a TID number has been acquired for an individual product.
sOverview
Extremely small high reliability connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB 2.0). Receptacles and plugs are available in a wide variety of mounting and termination configurations, permitting their use in various applications.
Drop-in (Mid-mount)
Reverse (Top mount)
sFeatures
1. Size reduction
Compared with the standard Mini-B connectors, the size of ZX connectors is reduced by approximately 60% while still allowing a high-speed data transfer of 480 Mbps, specified in USB 2.0.
Standard (Bottom mount)
2. Receptacle styles
Two interface configurations: Micro-B and Micro-AB in standard, mid-mount and reverse mounting styles. SMT and through-hole (shell) PC board terminations
3. Plug styles
Corresponding to the receptacle styles, two interface configurations: Micro-B and Micro-A, with direct wire or PCB wire soldering. Several plug styles can be used for data transmission, earphone or charging applications.
USB 2.0 Hi-Speed (480 Mbps) Eye pattern measurement results: Measured with USB 2.0 cable 2.4 m long
4. High durability
Unique contact and lock configuration assures high durability while maintaining easy insertion / disconnection. Fully mated condition (when mated with corresponding HRS connector) is confirmed by a definite tactile sensation
200 mV/div
TP2
500ps/div
2010.8
1
http://www.Datasheet4U.com
ZX SeriesqMicro-USB connectors meeting requirements of USB 2.0 Standard
sSpecifications
1 A (per contact) or Ratings Current rating 1.8 A (contacts No. 1 and 5) and 0.5 A (contacts No. 2, 3, and 4) Item 1. Contact resistance 2. Withstanding voltage 3. Capacitance 4. Durability 5. Total insertion/removal force 30 mø max. No flashover or insulation breakdown 2 pF max. Contact resistance: Rise from initial value of 10 mø max. Insertion force: 35 N max., Removal force: 8 N min. Specification 100 mA 100 V AC / 1 minute Between adjacent contacts at 1,000 Hz (AC voltage) 10,000 cycles Mated with corresponding connector Voltage rating Operating temperature range Storage temperature range Conditions 30 V AC -30°C to +85 °C (Note1) -30 °C to +85°C
Note1: Includes temperature rise caused by current flow. Note2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown.
sMaterials
qReceptacles
Part Insulator Contacts Shell Material LCP Copper alloy Stainless steel Finish Micro-B: Black, Micro-AB: Gray Selective gold plated Tin alloy plating Remarks UL94V-0
-----------------------------
qPlugs
Part Insulator Contacts Lock spring Shell Material Synthetic resin Copper alloy Stainless steel Stainless steel Finish Micro-A: White, Micro-B: Black Selective gold plated Remarks UL94V-0
------------------------------------------ZX 10's: Right-angle PCB wire, SMT 20's: Straight, PCB wire 40's: Direct wire 60's: Right-angle, PCB wire 80's: Cradle SMT Standard (Bottom mount) Standard (Bottom mount) through hole Reverse (Top mount) Reverse (Top mount) through hole Drop-in (Mid-mount) Micro-A Micro-B Micro-AB 5 Receptacle- Male Plug – Female SMT Through hole (solder tab length: 0.8mm) Assembly (Insulator/contact/lock) Cover (Note 1)
--------------Nickel plated or unfinished
sOrdering information
qReceptacles
1 Series name 2 Termination style
ZX 62 RD - B - 5 P * 8
1 2 3 4 5 6 7 8 3 Board mounting style
(Receptacles)
qPlugs
ZX 40 - B - 5 S * - UNIT
1 2 4 5 6 7 9 4 Mating side configuration 5 Number of contacts 6 Contact type 7 Serial No. 8 Shell termination style –
ZX 40 - B - SLDA
1 2 4 9
Blank D R RD M A B AB P S Blank 8 UNIT SLD*
sProduct Styles Table
Interface Micro-A Receptacle Plug
Receptacles 9 Components-plugs
Note 1: Classifiers such as A, B, and C are entered for *.
Micro-B
Micro-AB
2
http://www.Datasheet4U.com
ZX SeriesqMicro-USB connectors meeting requirements of USB 2.0 Standard
sConfigurations
Mating side Mounting, termination Application configuration styles/wire attachment Part Number 3D Image Page
SMT
Standard
ZX62-B-5PA(11)
4
SMT + DIP
Micro-B Reverse
ZX62D-B-5PA8
4
SMT
ZX62R-B-5P
5
R e c e p t a c l e s
Drop-in
SMT
ZX62M-B-5P(02)
5
SMT
Standard
ZX62-AB-5PA(11)
6
SMT + DIP
Micro-AB
ZX62D-AB-5P8
6
SMT
Reverse
ZX62R-AB-5P
7
SMT + DIP
ZX62RD-AB-5P8
7
Direct wire soldering Data PCB wire soldering (right angle, through hole)
Assembly :ZX40-B-5S-UNIT(12) (insulator/contacts/lock) Cover-top :ZX40-B-SLDA Cover-bottom :ZX40-SLDB Assembly :ZX10-B-5S-UNIT(12) (insulator/contacts/lock) Cover-top :ZX10-B-SLDA Cover-bottom :ZX10-SLDB(3.3)
9 and 10
11 and 12
P l u g s
Micro-B
Earphone
PCB wire soldering Assembly :ZX20-B-5S-UNIT(12) (insulator/contacts/lock) (straight, through hole) Cover :ZX20-B-SLDC PCB wire soldering.