AMPLIFIER UNIT
AMPLIFIER UNIT
C12419
The C12419 which furnishes current-to-voltage conversion circuit is designed for use with current...
Description
AMPLIFIER UNIT
C12419
The C12419 which furnishes current-to-voltage conversion circuit is designed for use with current sources like photomultiplier tubes. The performances are convenient to such an application as requiring a low noise and high gain preamplifier.
FEATURES
GBandwidth: DC to 1 MHz GCurrent-to-voltage Conversion Factor: 1 V/µA at 1 kΩ Load Resistance GInverting Output GAdjustable Offset Level with VR GLow Noise and High Gain
SPECIFICATIONS
Parameter Frequency Bandwidth (-3 dB) Current-to-voltage Load Resistance: 1 kΩ Conversion Factor Typ. Rise Time Input Polarity Max. Input Current Amplifying Method Output Impedance Maximum Output Load Resistance: 1 kΩ Load Resistance: 50 Ω Signal Voltage Typ. Output Noise Voltage A Input Output Connector Power Power Supply Voltage Max. Power Supply Voltage Max. Power Supply Current Operating Ambient Temperature Storage Temperature Weight
NOTE: ALoad Resistance: 50 Ω
Figure 1: Typical Frequency Response
Description / Value DC to 1 MHz 1 V/µA 350 ns Positive / Negative ±100 µA Inverting Output 50 Ω ±11 V Min. ±3 V Min. 1 mV rms BNC-R BNC-R DIN (6-pin) ±15 V ±18 V ±100 mA 0 °C to +40 °C -15 °C to +60 °C Approx. 165 g
RELATIVE GAIN (dB)
10
TACCB0126EA
5
0
-5
-10
-15
-20 101
102
103
104
FREQUENCY (kHz)
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to ...
Similar Datasheet