DatasheetsPDF.com

BALD6WK Dataheets PDF



Part Number BALD6WK
Manufacturers Fujitsu
Logo Fujitsu
Description MINIATURE RELAY
Datasheet BALD6WK DatasheetBALD6WK Datasheet (PDF)

MINIATURE RELAY 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) BA SERIES s FEATURES q q q q q q q q q Slim type relay for high density mounting CSA recognized Conforms to IEC60950, Bellcore specification and FCC Part 68 —Clearance more than 2.0 mm between coil and contacts —Creepage more than 2.5 mm between coil and contacts —Dielectric strength 2,000 VAC between coil and contacts —Surge strength 3,000 V between coil and contacts (at 2 × 10 µs surge wave) High sensitivity and low consumption power .

  BALD6WK   BALD6WK


Document
MINIATURE RELAY 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) BA SERIES s FEATURES q q q q q q q q q Slim type relay for high density mounting CSA recognized Conforms to IEC60950, Bellcore specification and FCC Part 68 —Clearance more than 2.0 mm between coil and contacts —Creepage more than 2.5 mm between coil and contacts —Dielectric strength 2,000 VAC between coil and contacts —Surge strength 3,000 V between coil and contacts (at 2 × 10 µs surge wave) High sensitivity and low consumption power Latching type available High reliability—bifurcated contacts Plastic sealed type Conforms to UL (under approval) SMT is available: BAS s ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (g) BA L – D (a) (b) (*) (c) 12 (d) W K (e) (g) BA : BA Series Nil : Standard type L : Latching type Nil : Single winding type D : Double winding type Refer to the COIL DATA CHART W : Bifurcated type K : Plastic sealed type Series Name Operation Function Number of Coil Nominal Voltage Contact Enclosure Note: Actual marking omits the hyphen (-) of (*) s SAFETY STANDARD AND FILE NUMBERS CSA CERTIFIED NRTL/C to C22.2 No. 14 No. 950 (File No. LR35579), UL 508, 1950 (File No. E45026) Relay type BA BAL BALD Nominal voltage 1.5 to 48 VDC 0.5 A 2A 0.3 A 125 VAC 30 VDC 110 VDC Contact rating resistive 1 Free Datasheet http://www.Datasheet4U.com BA SERIES s SPECIFICATIONS Standard Item BA-( ) W-K Contact Arrangement Material Style Resistance (initial) (at 1 A 6 VDC) Rating (resistive) Maximum Carrying Current Maximum Switching Power Maximum Switching Voltage Maximum Switching Current Minimum Switching Capacitance Coil Nominal Power (at 20°C) Operate Power (at 20°C) Operating Temperature Time Value Operate (at nominal voltage) Release (at nominal voltage) Insulation Resistance (at 500 VDC) between open contacts Dielectric Strength between adjacent contacts between coil and contacts Surge Strength Life Mechanical Electrical Other Misoperation Vibration Resistance Endurance Misoperation Shock Resistance Endurance Weight *1 2,000 VAC 1 minute 3,000 V (at 2 × 10 µs) 1× 107 105 operations minimum 1,000 VAC 1 minute 1,500 V (at 10 × 160 µs) Load*1 2 form C (DPDT) Gold overlay silver alloy Bifurcated Maximum 50 mΩ 0.5 A 125 VAC or 1 A 30 VDC 2A 62.5 AV, 30 W 250 VAC, 220 VDC 2A 0.01 mA 10 mVDC Approximately 0.5 pF (between open contacts, adjacent contacts) Approximately 1.0 pF (between coil and contacts) 0.25 to 0.36 W 0.14 to 0.2 W 0.2 W 0.15 W 0.36 W 0.205 W Single Winding Latching Type BAL-( ) W-K Double Winding Latching BAL-D ( ) W-K –40°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) Maximum 6 ms Maximum 4 ms Maximum 6 ms (set) Maximum 6 ms (reset) Minimum 1,000 MΩ 1,000 VAC 1 minute 2× operations minimum (0.5 A 125 VAC) 5 × 105 operations minimum (1 A 30 VDC) 10 to 55 Hz (double amplitude of 3.3 mm) 10 to 55 Hz (double amplitude of 5.0 mm) 500 m/s2 (11 ±1 ms) 1,000 m/s2 ( 6 ±1 ms) Approximately 1.9 g Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2 Free Datasheet http://www.Datasheet4U.com BA SERIES s COIL DATA CHART MODEL BA-1.5 W-K BA- 3 W-K BA-4.5 W-K Standard Type BA- 5 W-K BA- 6 W-K BA- 9 W-K BA- 12 W-K BA- 18 W-K BA- 24 W-K Nominal voltage 1.5 VDC 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC Coil resistance (±10%) 9Ω 36 Ω 81 Ω 100 Ω 144 Ω 324 Ω 576 Ω 1,296 Ω 2,304 Ω Must operate voltage*1 +1.13 VDC +2.25 VDC +3.38 VDC +3.75 VDC +4.5 VDC +6.75 VDC +9.0 VDC +13.5 VDC +18.0 VDC +36.0 VDC Must release voltage*1 +0.15 VDC +0.3 VDC +0.45 VDC +0.5 VDC +0.6 VDC +0.9 VDC +1.2 VDC +1.8 VDC +2.4 VDC +4.8 VDC Nominal power 250 mW 250 mW 250 mW 250 mW 250 mW 250 mW 250 mW 250 mW 250 mW 360 mW BA- 48 W-K 48 VDC 6,400 Ω Note: *1 Specified values are subject to pulse wave voltage. All values in the table are measured at 20°C. Nominal voltage 1.5 VDC 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC 1.5 VDC 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 18 VDC 24 VDC Coil resistance (±10%) 11.25 Ω 45 Ω 101 Ω 125 Ω 180 Ω 405 Ω 720 Ω 1,620 Ω 2,880 Ω P 6.25 Ω S 6.25 Ω BAL-D 3 W-K BAL-D4.5 W-K BAL-D 5 W-K BAL-D 6 W-K BAL-D 9 W-K BAL-D 12 W-K BAL-D 18 W-K BAL-D 24 W-K P S Double Winding Latching Type 25 Ω 25 Ω MODEL Single Winding Latching Type BAL-1.5 W-K BAL- 3 W-K BAL-4.5 W-K BAL- 5 W-K BAL- 6 W-K BAL- 9 W-K BAL- 12 W-K BAL- 18 W-K BAL- 24 W-K BAL-D1.5 W-K Set voltage*1 +1.13 VDC +2.25 VDC +3.38 VDC +3.75 VDC +4.5 VDC +6.75 VDC +9.0 VDC +13.5 VDC +18.0 VDC +1.13 VDC Reset voltage*1 –1.13 VDC –2.25 VDC –3.38 VDC –3.75 VDC –4.5 VDC –6.75 VDC –9.0 VDC –13.5 VDC –18.0 VDC +1.13 VDC Nominal power 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 200 mW 360 mW 360 mW +2.25 VDC +2.25 VDC +3.38 VDC +3.38 VDC +3.75 VDC +3.75 VDC +4.5 VDC +4.5 VDC +6.75 VDC +6.75 VDC +9.0 VDC +9.0 VDC +13.5 VDC +13.5 VDC +18.0 VDC +.


BALD5WK BALD6WK BALD9WK


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)