CM8600

CM8600 3 Watt Audio Power Amplifier with Selectable Shutdown Logic Level General Description The CM8600 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1.25 watts of continuous average power to an 8 BTL load and 2 watts of continuous average power (LD and MH only) to a 4ΩBTL load with less than 1% distortion (THD+N+N) from a 5.5V DC power supp ly. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The CM8600 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage appli- cations where minimal power consumption is a primary requirement. The CM8600 features a low-power consumption shutdown mode. To facilitate this, Shutdown may be enabled by either logic high or low depending on mode selection. Driving the shutdown mode pin either high or low enables the shutdown pin to be driven in a likewise manner to enable shutdown. The CM8600 contains advanced pop & click circuitry which eliminates noise which would otherwise occur during turnon and turn-off transitions. The CM8600 is unity-gain stable and can be configured by external gain-setting resistors. Key Specifications Ø Ø Improved PSRR at 217Hz & 1KHz Power Output at 5.0V, 1% THD+N, 4Ω (LD and MH only) 62dB Ø Ø 3W (typ) Ø Power Output...