MHP50

50W TO-220 HIGH POWER RESISTORS Features…………………………………………………………. ƒ ƒ ƒ Non-inductive, thin film technology. Thermally enhanced Industry standard TO220 package. RoHS compliant. Low thermal resistance, 2.3 °C/W resistor hot spot to metal tab. Complete thermal flow design available for easy implementation. Superior vibration durability. Small thin package for high density PCB installation. High frequency circuits and wide band / linear amplifiers. Switch mode and industrial RF power sources. AC motor control, electronic load and drive circuits. Automotive. Industrial PC modules (IPM) and measurement systems. ƒ ƒ ƒ ƒ Applications……………………………………………………… ƒ ƒ ƒ ƒ ƒ Specification Dimensions A C D dia.M MHP J G F E H N A 10.6 B 15.0 C 4.5 D 1.5 E 2.7 F 5.08 B K L G 0.75 H 0.5 J 1.5 K 19.0 L 2.7 M 3.6 N 15.0 Specification Item Power Rating Power Rating Thermal Resistance Resistance Range Nominal Resistance Series TCR Tolerance Operation Temp. Range Max. Operating Voltage. Dielectric Withstand Voltage Load Life Humidity Temp. Cycle Soldering Heat (Max) Solderability Insulation Resistance Vibration Specifications 50 Watt 2.25 Watt 2.3 °C/W 0.1-9.1 Ω E12 100 ppm/°C +/-1% (F) & 5% (J) -55°C to+155°C 500V or P.R 2000 Volts DC ∆R +/-(1.0 %+0.05 Ω) ∆R +/- (1.0 %+0.05 Ω) ∆R +/- (0.25 %+0.05 Ω) ∆R +/- (0.1 %+0.05 Ω) Over 95% of surface Over 1,000 MΩ ∆R +/- (0.25 %+0.05 Ω) Test Conditions -55 to 25 °C flange temperature Free air @ 25°C Hot spot to Tab Up to 51 KΩ also availabl...