Photoelectrics, Fibre Optic Sensor Contrast Sensor Type PD 60 CNK 18 BP ..
• Range: 18 mm ±2 mm • Microprocessor control...
Photoelectrics, Fibre Optic Sensor Contrast Sensor Type PD 60 CNK 18 BP ..
Range: 18 mm ±2 mm Microprocessor controlled and EEPROM parameter storage Operational voltage 10 - 30 V DC Output 100 mA,
NPN and
PNP Light or dark switching selectable Cable or M8 standard plug IP65 protection cUL and CE approved Manual contrast set-up
Product Description
The PD60CNK18BP .. is a fibre optic amplifier made specifically for plastic fibres to detect contrast. The sensor is microprocessor-based and features manual distance setup by keyboard. NO or NC (light or dark mode) output is selectable by wiring. The sensor output is built as a Push-pull output that performs both a
NPN and a
PNP output, which are fully protected against short-circuit, transients and wrong polarity. The sensor is built in a strong 13 x 30 x 60 mm polycarbonate housing for DIN-rail mounting.
Ordering Key
Type Housing style Housing size Housing material Not used Plastic fibres Sensing distance mm Output type Output configuration Connection type Teach-in
PD60CNK18BPM5T
Type Selection
Housing WxHxD 13 x 30 x 60 mm Fibre To be ordered separately. Range Sn 18 mm ±2 mm Ordering no.
NPN and
PNP cable PD 60 CNK 18 BP T Ordering no.
NPN and
PNP plug PD 60 CNK 18 BP M5 T
100 cm fibre w. M18 lens head FPDK01SCC100
Specifications
Detection distance Temperature drift Rated operational volt. (UB ) Ripple (Urpp ) Output current Continuous (Ie) Short-time (I) No load supply current (Io) Switching frequency Vol...