DatasheetsPDF.com

FKS2G022201H00 Dataheets PDF



Part Number FKS2G022201H00
Manufacturers WIMA
Logo WIMA
Description Polyester (PET) Film and Foil Capacitors
Datasheet FKS2G022201H00 DatasheetFKS2G022201H00 Datasheet (PDF)

WIMA FKS 2 Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm Special Features ˜ Pulse duty construction ˜ According to RoHS 2011/65/EU D Electrical Data Capacitance range: 1000 pF to 0.047 mF (E12-values on request) Rated voltages: 100 VDC, 250 VDC, 400 VDC Capacitance tolerances: ± 20%, ±10%, ±5% Operating temperature range: –55 + C to +100+ C (+125° C available subject to special enquiry) Test specifications: In accordance with IEC 60384-11 Climatic test categ.

  FKS2G022201H00   FKS2G022201H00


Document
WIMA FKS 2 Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm Special Features ˜ Pulse duty construction ˜ According to RoHS 2011/65/EU D Electrical Data Capacitance range: 1000 pF to 0.047 mF (E12-values on request) Rated voltages: 100 VDC, 250 VDC, 400 VDC Capacitance tolerances: ± 20%, ±10%, ±5% Operating temperature range: –55 + C to +100+ C (+125° C available subject to special enquiry) Test specifications: In accordance with IEC 60384-11 Climatic test category: 55/100/56 in accordance with IEC Insulation resistance at +20+ C:  3 x 10 4 M ¸ (mean value: 8 x 10 5 M¸) Measuring voltage: 100 V/1 min. Test voltage: 2 Ur, 2 sec. Maximum pulse rise time: 1000 V/msec for pulses equal to the rated voltage Dissipation factors at +20+ C: tan d   1 kHz   10 kHz 100 kHz at f C  0.047 mF    7 x 10 -3  15 x 10-3  20 x 10-3 Typical Applications For general DC-applications e.g. ˜ Coupling ˜ Decoupling Construction Dielectric: Polyethylene-terephthalate (PET) film Capacitor electrodes: Metal foil Internal construction: Voltage derating: A voltage derating factor of 1.25 % per K must be applied from +85+ C for DC voltages and from +75+ C for AC voltages. Reliability: Operational life  300 000 hours Failure rate  5 fit (0.5 x U r and 40+ C) Plastic film Metal foil electrode Terminating wire Encapsulation: Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94 V-0 Terminations: Tinned wire. Marking: Colour: Red. Marking: Silver. Epoxy resin seal: Yellow. Mechanical Tests Pull test on pins: 10 N in direction of pins according to IEC 60068-2-21 Vibration: 6 hours at 10 ... 2000 Hz and 0.75 mm displacement amplitude or 10 g in accordance with IEC 60068-2-6 Low air density: 1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test: 4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29 Packing Available taped and reeled. Detailed taping information and graphs at the end of the catalogue. For further details and graphs please refer to Technical Information. 28 Free Datasheet http://www.datasheetlist.com/ 02.14 WIMA FKS FKP 2 4 Continuation D General Data Capacitance 1000 1500 2200 3300 4700 6800 0.01  0.015 0.022 0.033 0.047 pF „ „ „ „ „ mF „ „ „ „ W H W H L 100 VDC/63 VAC* PCM** Part number 5 5 5 5 5 5 5 5 5 5 5 W H 250 VDC/160 VAC* L PCM** Part number 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 5 5 5 5 5 5 5 5 5 5 5 FKS2F011001A00_ _ _ _ FKS2F011501A00_ _ _ _ FKS2F012201A00_ _ _ _ FKS2F013301A00_ _ _ _ FKS2F014701A00_ _ _ _ FKS2F016801A00_ _ _ _ FKS2F021001B00_ _ _ _ FKS2F021501C00_ _ _ _ FKS2F022201E00_ _ _ _ FKS2F023301H00_ _ _ _ FKS2F024701K00_ _ _ _ 2.5   6.5 7.2 2.5   6.5 7.2 2.5   6.5 7.2 2.5   6.5 7.2 2.5   6.5 7.2 2.5   6.5 7.2 3   7.5 7.2 3.5   8.5 7.2 4.5   9.5 7.2 5.5 11.5 7.2 7.2 13  7.2 FKS2D011001A00_ _ _ _  2.5  6.5 FKS2D011501A00_ _ _ _  2.5  6.5 FKS2D012201A00_ _ _ _  2.5  6.5 FKS2D013301A00_ _ _ _  2.5  6.5 FKS2D014701A00_ _ _ _  2.5  6.5 FKS2D016801A00_ _ _ _  2.5  6.5 FKS2D021001B00_ _ _ _ 3  7.5 FKS2D021501C00_ _ _ _  3.5  8.5 FKS2D022201E00_ _ _ _  4.5  9.5 FKS2D023301H00_ _ _ _  5.5  11.5 FKS2D024701K00_ _ _ _  7.2 13 Capacitance 1000 1500 2200 3300 4700 6800 0.01  0.015 0.022 0.033 pF „ „ „ „ „ 400 VDC/200 VAC* L PCM** Part number 5 5 5 5 5 5 5 5 5 5 FKS2G011001A00_ _ _ _ FKS2G011501A00_ _ _ _ FKS2G012201A00_ _ _ _ FKS2G013301A00_ _ _ _ FKS2G014701A00_ _ _ _ FKS2G016801B00_ _ _ _ FKS2G021001C00_ _ _ _ FKS2G021501E00_ _ _ _ FKS2G022201H00_ _ _ _ FKS2G023301K00_ _ _ _ 2.5   6.5 7.2 2.5   6.5 7.2 2.5   6.5 7.2 2.5   6.5 7.2 2.5   6.5 7.2 3   7.5 7.2 3.5   8.5 7.2 4.5   9.5 7.2 5.5 11.5 7.2 7.2 13  7.2 mF „ „ „ * AC voltage: f = 50 Hz; 1.4 x Urms + UDC  U r ** PCM = Printed circuit module = pin spacing Dims. in mm. Impedance change with frequency (general guide). Part number completion: Tolerance: 20 % = M 10 % = K   5 % = J Packing: bulk = S Pin length: 6-2 = SD Taped version see page 128. -2 W L H d = 0.5 l 6 d    5 PCM at the pin exit points (± 0.5) Rights reserved to amend design data without prior notification. 02.14 29 Free Datasheet http://www.datasheetlist.com/ D Recommendation for Processing and Application of Through-Hole Capacitors Soldering Process Internal temperature of the capacitor must be kept as follows: Polyester: preheating: T max. T 125° C soldering: T max. T 135° C Polypropylene: preheating: Tmax. T 100° C soldering: T max. T 110° C Single wave soldering Soldering bath temperature: T P 260 ° C Dwell time: t P 5 sec Double wave soldering Soldering bath temperature: T P 260 ° C Dwell time: S t P 5 sec Due to different soldering processes and heat requirements the graphs are to be regarded as a recommendation only. WIMA Quality and Environmental Philosophy ISO 9001:2008 Cer.


FKS2G021501E00 FKS2G022201H00 FKS2G023301K00


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)