Q1T-03600-341

N a t io n a l C o n t r o ls C o r p. Phone 800-323-2593 Fax 630-231-1377 Internet www.natcon.com www.nationalcontrols.com 630-231-5900 Time Delay Cube Relays Delay On Make (Relay Output) Features R 1 File #E65038 Time Delays To 10 Hours Standard Solid-State Digital Timing 100% Life Tested 20:1 Maximum To Minimum Timing Ratio Sealed S.P.D.T. Output Contacts Compact Size Superior Transient Protection Epoxy Encapsulated Flame-Retardant and Solvent-Resistant Polyester Thermoplastic Housing Trimpot On-Board with Sealed Cermet Element Made in U.S.A. C R Q1T Series Logic Function Diagram: Input Voltage On Off On Off Timing Operating Logic: Upon application of voltage to the input terminals L1, L2, the time delay is initiated. At the end of the preset time delay, the relay coil is energized and the contacts transfer. Reset is accomplished by removing voltage from the input terminals. Load Specifications Time Delay Delay On Make Function C L Adjustment: On-board trimpot Range: 50 mS to 10 hours in 9 ranges Repeatability: ±.5% maximum (0.25% typ.) at constant temperature Accuracy: Maximum time +10%, -0%; Minimum time -30%, +0% Reset Time: .25 seconds maximum, by removal of the input voltage Protection Transient Voltage: 1000 P.l.V. components used Isolation Resistance: 100 megohms minimum between terminals and case Dielectric Breakdown: 3000 VAC, RMS, terminals to mounting; 1500 VAC, RMS, input to output Input .885 1.25 .25 X .032 MALE FAST-ON TERMINALS (5 PL.) Mecha...