Connector
XH CONNECTOR
1
Emboss Tape
Radial Tape
2.5mm pitch/Disconnectable Crimp style connectors
Specifications ––––––––––––...
Description
XH CONNECTOR
1
Emboss Tape
Radial Tape
2.5mm pitch/Disconnectable Crimp style connectors
Specifications –––––––––––––––––––
Current rating: 3A AC, DC (AWG #22) Voltage rating: 250V AC, DC Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) Contact resistance: Initial value/ 10m Ω max. After environmental testing/ 20m Ω max. Insulation resistance: 1,000M Ω min. Withstanding voltage: 1,000V AC/minute Applicable wire: AWG #30 to #22 Applicable PC board thickness: 1.6mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details.
5 JS
T
The XH connector was developed based on the high reliability and versatility of our NH series connectors. The connector is very small with a mounting height of 9.8mm.
Original folded beam contact Box-shaped shrouded header Header with a boss Interchangeability Conforming to the HA terminal
Standards ––––––––––––––––––––––
1 Certified LR20812 2 J50014297
0
Recognized E60389
Through-hole type (viewed from soldening side) Top entry type
Side entry type
2 circuits 3 to 20 circuits
Top entry type with a boss
(1 circuit) (2 circuits or more)
2 circuits 3 to 20 circuits
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimension...
Similar Datasheet