AW-CB400L

ORDER NO. CBMD0601005 . Sec. 1 Sec. 2 Sec. 3 Sec. 4 Sec. 5 Service Information Block Diagrams Schematic Diagrams Circuit Board Diagrams Exploded Views & Replacement Parts List Remote Operation Panel AW-CB400N/L © 2006 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law. Free Datasheet http://www.datasheet-pdf.com/ ! WARNING This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt with in this service information by anyone else could result in serious injury or death. For AW-CB400N Specifications Supply voltage: DC 12.0 V Power consumption: 3.8 W indicates safety information. Input connectors DC 12V IN: GND: Output connectors CONTROL OUT TO CONTROL PANEL: CONTROL OUT TO CAMERA 1 to 5: XLR, 4 pins GND terminal D-SUB 29-pin RJ45, camera control RS-422 level 10Base-T straight cable (UTP category 5), max. 1000 meters Input/output connectors INCOM (top panel): TALLY/INCOM: XLR, 4 pins D-SUB 15-pin TALLY: Contact input (do not apply a voltage in excess of 5V) INCOM: 4-wire system DATA SET, menu, camera control selection, DTL, sc...