TVS
1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A
www.vishay.com
Vishay General Semiconductor
TRANSZORB® Transient Volta...
Description
1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A
www.vishay.com
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
Case Style 1.5KE
FEATURES Glass passivated chip junction Available in unidirectional and bidirectional 1500 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % Excellent clamping capability Very fast response time Low incremental surge resistance AEC-Q101 qualified available Solder dip 275 °C max. 10 s, per JESD 22-B106 Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
VBR unidirectional VBR bidirectional VWM unidirectional VWM bidirectional
PPPM PD
IFSM (unidirectional only) TJ max. Polarity
6.8 V to 540 V 6.8 V to 220 V 5.8 V to 459 V 5.8 V to 185 V
1500 W 6.5 W 200 A 175 °C Unidirectional, bidirectional
Package
1.5KE
DEVICES FOR BIDIRECTION APPLICATIONS
For bidirectional types, use CA suffix (e.g. 1.5KE220CA) Electrical characteristics apply in both directions.
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication.
MECHANICAL DATA
Case: molded epoxy body over passivated junction Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3_X - RoHS compliant, and...
Similar Datasheet