PIC18F66K80 FAMILY
28/40/44/64-Pin, Enhanced Flash Microcontrollers with ECAN™ XLP Technology
Power-Managed Modes:
• Ru...
PIC18F66K80 FAMILY
28/40/44/64-Pin, Enhanced Flash Microcontrollers with ECAN™ XLP Technology
Power-Managed Modes:
Run: CPU on, Peripherals on Idle: CPU off, Peripherals on Sleep: CPU off, Peripherals off Two-Speed Oscillator Start-up Fail-Safe Clock Monitor (FSCM) Power-Saving Peripheral Module Disable (PMD) Ultra Low-Power Wake-up Fast Wake-up, 1 s, Typical Low-Power WDT, 300 nA, Typical Run mode Currents Down to Very Low 3.8 A, Typical Idle mode Currents Down to Very Low 880 nA, Typical Sleep mode Current Down to Very Low 13 nA, Typical
ECAN Bus Module Features:
Conforms to CAN 2.0B Active Specification Three Operating modes:
- Legacy mode (full backward compatibility with existing PIC18CXX8/FXX8 CAN modules)
- Enhanced mode - FIFO mode or programmable TX/RX buffers Message Bit Rates up to 1 Mbps DeviceNet™ Data Byte Filter Support Six Programmable Receive/Transmit Buffers Three Dedicated Transmit Buffers with Prioritization Two Dedicated Receive Buffers
TABLE 1: DEVICE COMPARISON
ECAN Bus Module Features (Continued):
16 Full, 29-Bit Acceptance Filters with Dynamic Association
Three Full, 29-Bit Acceptance Masks Automatic Remote Frame Handling Advanced Error Management Features
Special Microcontroller Features:
Operating Voltage Range: 1.8V to 5.5V On-Chip 3.3V
Regulator Operating Speed up to 64 MHz Up to 64 Kbytes On-Chip Flash Program Memory:
- 10,000 erase/write cycle, typical - 20 years minimum retention, typica...