DatasheetsPDF.com

ICP-N38 Dataheets PDF



Part Number ICP-N38
Manufacturers Rohm
Logo Rohm
Description Circuit protection elements
Datasheet ICP-N38 DatasheetICP-N38 Datasheet (PDF)

IC protector Overcurrent Protection Elements Circuit protection elements zCircuit protection elements Rohm’s circuit protectors have a very reliable current cut-off capability that protects ICs and their circuits from accidental short circuit loads. Whether operated in AC or DC circuits, these circuit protectors have a very low internal resistance in normal operation, but safely and rapidly break the circuit when the current cutoff level is exceeded. zFeatures 1) Cutoff is sharp and repeatable.

  ICP-N38   ICP-N38


Document
IC protector Overcurrent Protection Elements Circuit protection elements zCircuit protection elements Rohm’s circuit protectors have a very reliable current cut-off capability that protects ICs and their circuits from accidental short circuit loads. Whether operated in AC or DC circuits, these circuit protectors have a very low internal resistance in normal operation, but safely and rapidly break the circuit when the current cutoff level is exceeded. zFeatures 1) Cutoff is sharp and repeatable. 2) Low internal resistance and minimal voltage drop. 3) Incombustible. 4) Compact. 5) Rated for continuous use. 6) Good temperature characteristics. 7) Withstands surges well. 8) UL certified (UL certification number E107856). zApplication Current surge protection zOperation notes Do not use this product on the primary side of commercial power supplies. Arcs that result after cutoff may damage the molding. Surface mounting Type zICP-S series Product name ICP-S0.5 ICP-S0.7 ICP-S1.0 ICP-S1.2 Rated Cutoff Internal resistance Rated Operating Storage current (A) characteristics Typ.(Ω) voltage (V) temperature (°C) temperature (°C) 0.5 0.7 1.0 1.2 Fig.1 Fig.2 Fig.3 Fig.4 0.150 0.084 0.061 0.048 50 −55 to +125 −55 to +125 Rev.A 1/5 IC protector Overcurrent Protection Elements zCutoff characteristics 10 10 10 CUTOFF TIME : (S) CUTOFF TIME : (S) 0.1 Typ. 0.1 Typ. CUTOFF TIME : (S) 1 1 1 0.1 Typ. 0.01 0.01 0.01 0.001 0 1 2 3 4 5 6 7 8 9 0.001 0 1 2 3 4 5 6 7 8 9 0.001 0 2 4 6 8 10 12 14 16 18 CUTOFF CURRENT : (A) CUTOFF CURRENT : (A) CUTOFF CURRENT : (A) Fig.1 ICP-S0.5 Fig.2 ICP-S0.7 Fig.3 ICP-S1.0 10 CUTOFF TIME : (S) 1 0.1 Typ. 0.01 0.001 0 2 4 6 8 10 12 14 16 18 CUTOFF CURRENT : (A) Fig.4 ICP-S1.2 The cutoff characteristics shown are typical. For further details of how to use these protectors, please request the technical documentation from your Rohm representative. zExternal dimensions (Unit : mm) ICP-S0.5/S0.7/S1.0/S1.2 3.0±0.1 3.2±0.2 2.0±0.1 1.55±0.1 0 to 0.1 2.5±0.1 0.6 1.0 1.8±0.1 Rev.A 2/5 IC protector Overcurrent Protection Elements zPackaging specifications Package type Taping TN 2000 ICP-S Type ICP-S0.5 ICP-S0.7 ICP-S1.0 ICP-S1.2 Symbol Basic ordering unit (pieces) zTaping specifications (Unit : mm) ICP-S taping (TN) Reel 9.0±0.3 Taping 11.4±1.0 +0.1 φ1.5 −0 1.75±0.1 4.0±0.1 4.0±0.1 0.4±0.1 2.0±0.05 φ13±0.2 5.3±0.2 3.5±0.05 0~0.5 +1 φ60 −0 0 φ180 + −3 Label attachment position Electrode direction φ1.15±0.1 2.8±0.2 3.5±0.2 8.0±0.2 2.3±0.2 Rev.A 3/5 IC protector Overcurrent Protection Elements Leaded type ICP-N series Product name Rated Cutoff Internal resistance Rated Operating Storage current (A) characteristics Typ.(Ω) voltage (V) temperature (°C) temperature(°C) ICP-N10 ICP-N15 ICP-N20 ICP-N25 ICP-N38 ICP-N50 ICP-N70 0.4 0.6 0.8 1.0 1.5 2.0 2.5 Fig.1 Fig.2 Fig.3 Fig.4 Fig.5 Fig.6 Fig.7 0.220 0.135 0.100 0.070 0.042 0.035 0.023 50 −55 to +125 −55 to +125 zCutoff characteristics 10 10 10 CUTOFF TIME : (S) CUTOFF TIME : (S) 0.1 Typ. 0.1 Typ. CUTOFF TIME : (S) 1 1 1 0.1 Typ. 0.01 0.01 0.01 0.001 0 1 2 3 4 5 6 7 8 9 0.001 0 2 4 6 8 10 12 14 16 18 0.001 0 2 4 6 8 10 12 14 16 18 CUTOFF CURRENT : (A) CUTOFF CURRENT : (A) CUTOFF CURRENT : (A) Fig.1 ICP-N10 Fig.2 ICP-N15 Fig.3 ICP-N20 10 10 10 CUTOFF TIME : (S) CUTOFF TIME : (S) 0.1 Typ. 0.1 Typ. CUTOFF TIME : (S) 1 1 1 0.1 Typ. 0.01 0.01 0.01 0.001 0 2 4 6 8 10 12 14 16 18 0.001 0 4 8 12 16 20 24 28 32 36 0.001 0 4 8 12 16 20 24 28 32 36 CUTOFF CURRENT : (A) CUTOFF CURRENT : (A) CUTOFF CURRENT : (A) Fig.4 ICP-N25 Fig.5 ICP-N38 Fig.6 ICP-N50 Rev.A 4/5 IC protector Overcurrent Protection Elements 10 CUTOFF TIME : (S) 1 0.1 Typ. 0.01 0.001 0 4 8 12 16 20 24 28 32 36 CUTOFF CURRENT : (A) Fig.7 ICP-N70 The cutoff characteristics given represent typical values. Technical documentation regarding ways of using circuit protectors is available from your Rohm representative. zExternal dimensions (Unit : mm) ICP-N10/N15/N20/N25/N38/N50/N70 6.35±0.5 zPackaging specifications Packaging type Taping T104 3000 Symbol Basic ordering unit (pieces) 5.0±0.2 2.5Min. 4.0±0.2 ICP-N Type ICP-N10/N15/N20/N25/N38/N50/N70 0.45±0.1 +0.1 19.0 − 0.5 0.5 0.5 +0.6 5.0 − 0.2 zTaping specifications (Unit : mm) ICP-N taping (T104) 6.35±0.5 12.7±0.5 0±0.5 5.2Max. 0±1.0 ICP-N zigzag fold taping 5.2Max. 2.5Min. +0.1 19.0− 0.5 16.0±0.5 11.0Max. 0 to 0.5 3.85±0.5 27 4.2Max. 5 2.5Min. 6.0±0.5 6.0±0.5 9.0±0.5 +1.0 18.0− 0.5 40 0.5±0.1 +0.6 5.0 − 0.2 12.7±0.3 0.4 +0.2 −0.1 0.7±0.2 φ4.0±0.2 6.35±0.5 33 0 Rev.A 5/5 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. .


ICP-N25 ICP-N38 ICP-N50


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)