Ultra Low Power ADC
Si1010/1/2/3/4/5
Ultra Low Power, 16/8 kB, 12/10-Bit ADC MCU with Integrated 240–960 MHz EZRadioPRO® Transceiver Ultra L...
Description
Si1010/1/2/3/4/5
Ultra Low Power, 16/8 kB, 12/10-Bit ADC MCU with Integrated 240–960 MHz EZRadioPRO® Transceiver Ultra Low Power: 0.9 to 3.6 V Operation - Typical sleep mode current < 0.1 µA; retains state and RAM contents over full supply range; fast wakeup of < 2 µs Less than 600 nA with RTC running Less than 1 µA with RTC running and radio state retained On-chip dc-dc converter allows operation down to 0.9 V. Two built-in brown-out detectors cover sleep and active modes
EZRadioPRO® Transceiver
Frequency range = 240–960 MHz Sensitivity = –121 dBm FSK, GFSK, and OOK modulation Max output power = +20 dBm (Si1010/1), +13 dBm (Si1012/3/4/5) RF power consumption - 18.5 mA receive - 18 mA @ +1 dBm transmit - 30 mA @ +13 dBm transmit - 85 mA @ +20 dBm transmit (Si1010/1) Data rate = 0.123 to 256 kbps Auto-frequency calibration (AFC) Antenna diversity and transmit/receive switch control Programmable packet handler TX and RX 64 byte FIFOs Frequency hopping capability On-chip crystal tuning
10-Bit or 12-Bit Analog to Digital Converter - Up to 300 ksps - Up to 18 external inputs - External pin or internal VREF (no external capacitor required) Built-in temperature sensor External conversion start input option Autonomous burst mode with 16-bit automatic averaging accumulator
Dual Comparators - Programmable hysteresis and response time - Configurable as interrupt or reset source - Low current (< 0.5 µA) On-Chip Debug - On-chip debug circuitry facilitates full-speed, non-intrusive
in-s...
Similar Datasheet